[Xitami] Multi server issue

[General]

Here is what I got when I did it. 

I set one to 192.168.1.2 and the other to 192.168.1.28 disabled ftp and lrwp
on one. 
http://www.miplanet.net/screencap.jpg

Ron

-----Original Message-----
From: xitami-bounces at lists.xitami.org
[mailto:xitami-bounces at lists.xitami.org] On Behalf Of Magnus Wedberg
Sent: Tuesday, March 25, 2008 8:20 PM
To: Xitami Users General Discussion
Subject: Re: [Xitami] Multi server issue

General wrote, On 2008-03-26 01:11:
> So what you are saying if I do a port scan on my server with 28 IP 
> addresses bound to my one NIC card I should see 29 port 80's is that 
> correct?

Yes, if you scan an IP /range/. You don't scan an adapter; in fact, it 
doesn't matter (for TCP/IP, in this context) if you have 28 NICs with 
one IP each or one NIC with 28 IPs. It's the same thing. You try to 
connect to a TCP socket (which is an IP/port combination, which an 
application is listening to) and you look for a response. So:

192.168.0.1:80
192.168.0.2:80
192.168.0.3:80
192.168.0.4:80
...etc...
192.168.0.28:80

...and there you have your 28 port 80s.



-- 
Magnus Wedberg
http://www.magnuswedberg.com/
mw AT 9000.org
Warning! Objects in viewfinder may be closer than they appear.



--
Xitami Users Mailing List -- For Xitami support
To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami


-- 
No virus found in this incoming message.
Checked by AVG. 
Version: 7.5.519 / Virus Database: 269.22.0/1341 - Release Date: 3/24/2008
3:03 PM