[Xitami] Re changed IP address
Johannes Prost
xitami at pastryworld.ca
Wed Dec 7 15:16:24 CET 2005
here is your sample you attached
#Created at Installation time
#
[/Admin]
ltdeditions = "mypassword"[Privat]
those [....] are called sections. And under each section you find the instructions xitami should
handle; like in this example section /Admin (admin console) you are telling xitami to use the
username "ltdeditions in combination with the password "mypassword".
And I think what Ayhan is referring to is, that you only can have one instruction per line; line by
line.
It should look like this if you have more in your default.aut ( without the ----------)
-------------------------------------------
#Created at Installation time
#
[/Admin]
ltdeditions = "mypassword"
[Privat]
some enties here if needed
[next section]
and so on
------------------------------------
This format is for all the configuration files ( I don't know if that is the correct wording, I
just call them that way) But to get your console working, you only need the admin section.
> If it is #
>
> That didn't work either.
>
> Linda
>
>
> Ayhan Tuncer wrote:
> > Linda,
> >
> > Your defaults.aut:
> >
> > You don't have a linebreak after the name=password entry in the
> > defaults.aut. It goes one record per line and a line ends with a
> > linebreak. Add a linebreak to end the record. Actually add many
> > linebreaks to the end of the file so this won't happen to you in future
> > again.
> >
> > Other than that, the format is perfectly fine. You don't have to have
> > anything else in the file. I don't and it works.
> >
> > There are other things to say about your virtual hosts bur I think you
> > should get your admin password working first.
> >
> > Ayhan
> >
> > - - -
> >
> > -----Original Message-----
> > From: xitami-bounces at lists.xitami.org
> > [mailto:xitami-bounces at lists.xitami.org] On Behalf Of Linda McCullough
> > Sent: Wednesday, December 07, 2005 7:50 AM
> > To: Xitami Users General Discussion
> > Subject: [Xitami] Re changed IP address
> >
> >
> > I will try it in reverse this time.
> > Attached are my Defaults.aut and
> > Defaults.cfg
> > And some other ones. Thanks for all the
> > time and help from all of you.
> >
> > Linda
> >
> > Ayhan Tuncer wrote:
> >
> >>The defaults.aut on my system (XP Pro) is attached. It works fine
> >>without spaces or the #*END.
> >>
> >>If you want to use the singular form of the file name as: default.aut,
> >>then your defaults.cfg file should contain a line like this:
> >>
> >>[Security]
> >> Filename=default.aut
> >>
> >>Because that's how Xitami knows the name of the file which is to
> >
> > contain
> >
> >>the authentication data and spelling of the name does make a
> >
> > difference.
> >
> >>The name of the file Xitami looks for by default (if nothing overrides
> >>that in cfg) is plural defaults.aut and if not there then xitami.aut.
> >>
> >>I've also attached the xitami.aut. It serves as the ultimate format
> >>example for the aut files.
> >>
> >>- - -
> >>
> >>-----Original Message-----
> >>From: xitami-bounces at lists.xitami.org
> >>[mailto:xitami-bounces at lists.xitami.org] On Behalf Of Johannes Prost
> >>Sent: Tuesday, December 06, 2005 3:50 PM
> >>To: Xitami Users General Discussion
> >>Subject: Re: [Xitami] RE: Changed IP address / default.aut
> >>
> >>okay, here we go. Attached is my default.aut file exept the password.
> >>put yours in and you should
> >>be ready to go if your LAN addresses are 192.168.100.*
> >>
> >>In case the attachment is stripped, create your file as desribed in
> >
> > the
> >
> >>other mails and put the
> >>following lines in:(without the ---------) copy/paste
> >>only make sure you have a space between = and " otherwise it is not
> >>working for me here (2.5c2)
> >>----------------------------
> >>#*END
> >>
> >>[/admin]
> >> username = "yourpassword"
> >> Webmask = "192.168.100.*"
> >>---------------------------------
> >>
> >>With this you should be able to open the console in your browser with
> >
> > :
> >
> >>1. http://computername/admin
> >>2. username password
> >>3. console window
> >>
> >>I am using this webmask so I am able to connect from any machine in my
> >>small LAN
> >>
> >>
> >>Johannes
> >>
> >>
> >>
> >>>I can see my site in the browser using
> >>>this: http://127.0.0.1
> >>>
> >>>When I type: http://127.0.0.1/admin It
> >>>puts up the screen asking for password
> >>>and I get no further. I had the password
> >>>written down so I know it was the right
> >>>one but didn't work. So I can't get to
> >>>console.
> >>>
> >>>When I go to the url I get the error page.
> >>>
> >>>If I have to make the defaults file
> >>>manually (I've tried but nothing worked)
> >>>can someone give me a clear example of
> >>>the layout and exactly what must go
> >>>there. In the copy of xitami that I had
> >>>backed up, there was no defaults.aut
> >>>only defaults.cfg and that only
> >>>mentioned the virtual host that I made a
> >>>while ago.
> >>>
> >>>Linda
> >>>
> >>>Go Bonkers wrote:
> >>>
> >>>
> >>>>Default.aut here makes and modifies itself with a very little effort
> >>>>and by making it in the console you have ip access restrictions,
> >>
> >>realm
> >>
> >>
> >>>>if needed, login/passwords.
> >>>>
> >>>>Basicly mine;
> >>>>
> >>>>http://192.168.0.11/admin (from my laptop) takes me to the
> >>
> >>console.
> >>
> >>
> >>>>click Configuration button, at top of page click the link
> >>>>'Security'
> >>>>
> >>>>Password file name it, defaults.aut if its not existing.
> >>>>Define button ...
> >>>>/admin webpages/admin 192.168.0.12,192.168.0.11,127.0.0.1
> >>>>
> >>>>Click /admin username password
> >>>>
> >>>>pretty much everything is done with defaults except there are a few
> >>>>fill text boxes and add some checks marks along the way. Takes
> >>>>moments.
> >>>>
> >>>>
> >>>>
> >>>>--
> >>>>Xitami Users Mailing List -- For Xitami support
> >>>>To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami
> >>>>
> >>>>
> >>>
> >>>
> >>>--
> >>>Xitami Users Mailing List -- For Xitami support
> >>>To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami
> >>
> >>
> >>Johannes
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >
> > ------------------------------------------------------------------------
> >
> >>
> >>--
> >>Xitami Users Mailing List -- For Xitami support
> >>To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami
> >
> >
> >
> > --
> > Xitami Users Mailing List -- For Xitami support
> > To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami
> >
> >
>
>
> --
> Xitami Users Mailing List -- For Xitami support
> To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami
Johannes
More information about the Xitami
mailing list