[Xitami] Setting FTP Data Port to 20

[Charles Schmidling]

Sorry, my bad, misread your note.
Didn't know it scanned.  When I ran the FTP service, it was shifted to port
1916.  Maybe directly setting the port might help.  I had download issues
with the FTP service (premature completeness) so switched to another.

[cut another faux pas]

I did find this in Xitami.cfg (for use in defaults.cfg):

#   Specifies the port at which data connections will be made. Xitami
#   scans for free ports, so this is simply the start of a range of
#   ports. The port is shifted by whatever value was used for the
#   server portbase.

[ftp]
    data-port=200

Whatever that means.  It may either allow you to shift the starting scan
point or set the starting scan point (say at 20) and it might stop there.

Don't know.  Worth a shot.

Much luck,
Charles

----- Original Message -----
From: "John Stuppi" <jstuppi@cisco.com>
To: <xitami@lists.xitami.org>
Sent: Thursday, January 29, 2004 2:15 PM
Subject: RE: [Xitami] Setting FTP Data Port to 20


> Thanks Charles but I think you missed my point.  I still want to use the
> FTP Server - what I want to prevent is Xitami "scanning for free ports":
>
> "data-port
> Specifies the port at which data connections will be made. Xitami scans
> for free ports, so this is simply the start of a range of ports. The
> port is shifted by whatever value was used for the server portbase.
> Default: 200. "
>
>
>
> Thanks,
> John
>
>
> John Stuppi, CISSP
> CCIE #11154, Security
> Network Consulting Engineer
>
> Cisco Systems, Inc.
> 1325 Campus Parkway
> Wall Township, NJ 07753
> Office: (732) 751-6184
> Mobile: (732) 319-3886
> Fax: (732) 751-6002
>
>
> -----Original Message-----
> From: xitami-admin@lists.xitami.org
> [mailto:xitami-admin@lists.xitami.org] On Behalf Of Charles Schmidling
> Sent: Thursday, January 29, 2004 3:12 PM
> To: xitami@lists.xitami.org
> Subject: Re: [Xitami] Setting FTP Data Port to 20
>
>
> Turn it off.
>
> In defaults.cfg:
> [Ftp]
> Enabled="0"
>
> Done deal.
>
>
> ----- Original Message -----
> From: "John Stuppi" <jstuppi@cisco.com>
> To: <xitami@lists.xitami.org>
> Sent: Thursday, January 29, 2004 9:30 AM
> Subject: [Xitami] Setting FTP Data Port to 20
>
>
> > Is there a way to prevent the Xitami FTP server from trying other
> > ports for the FTP Data Port (default = 20) when using Active FTP?  I
> > need the server to only use TCP 20 for troubleshooting purposes.
> > Thanks in advance.
> >
> > Thanks,
> > John
> >
> >
> > John Stuppi, CISSP
> > CCIE #11154, Security
> > Network Consulting Engineer
> >
> > Cisco Systems, Inc.
> > 1325 Campus Parkway
> > Wall Township, NJ 07753
> > Office: (732) 751-6184
> > Mobile: (732) 319-3886
> > Fax: (732) 751-6002
> >
> >
> > --
> > Xitami Users Mailing List -- For Xitami support
> > To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami
>
>
> --
> Xitami Users Mailing List -- For Xitami support
> To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami
>
>
> --
> Xitami Users Mailing List -- For Xitami support
> To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami