From xitami@lists.xitami.org Thu Jan 1 02:00:14 2004 From: xitami@lists.xitami.org (Steven L. Haas) Date: Wed, 31 Dec 2003 20:00:14 -0600 Subject: [Xitami] Running server through a router References: <004f01c3cfcc$2c462b60$56d1a2d1@esactive.easystreet.com> Message-ID: This is a multi-part message in MIME format. ------=_NextPart_000_000E_01C3CFD8.B4768E60 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Thanks... I'm sorry to be an uninformed newbie & keep asking questions, = but would it be possible for you to explain to me how to do this, or = what I should do exactly? I understand computers & the internet fairly = well, but I'm pretty new to networking. I found a place in my router's = configuration page to forward ports, etc., but I don't know what I'm = doing once I get there. I also dont know how to assign an internal IP = address, or what to do with it once that's been done. Thanks again for the help, Steve ----- Original Message -----=20 From: Day Tooley=20 To: xitami@lists.xitami.org=20 Sent: Wednesday, December 31, 2003 12:30 PM Subject: Re: [Xitami] Running server through a router Looks like you will need to port-forward port 80 in your router to = your Windows hosting machine. Also, you will need to permanently assign = an internal IP address to your hosting machine. ~~~~~~~~~~~~~~~~~~~~~~~~~~~ Day Tooley Webfoot@EasyStreet.com When the game is over, both the king and the pawn are put into the = same box. ----- Original Message -----=20 From: Steven L. Haas=20 To: xitami@lists.xitami.org=20 Sent: Wednesday, December 31, 2003 7:00 AM Subject: [Xitami] Running server through a router I am trying to run the Xitami web server on my WIndows XP machine = that is connected to the internet via a cable modem (RoadRunner/Motorola = Surboard). The internet connection is split amongst 2 computers using a = Linksys router. When I start the web server everything seems fine, but = when I try to access the web page I have loaded on the server by = connecting to my internet connection's (cable modem) IP address, I am = directed to the router's configuration page. This also happens when the = server is turned off, so it's not a big suprise. What is odd is that = when I try to connect to the router's config page by entering the = router's default IP address into IE, I am not taken to the config page = as usual, but I'm instead directed to the web page I have installed on = the Xitami web server. When the web server is turned off I go straight = to the config page as expected. It seems like somehow the router's IP = is bouncing me back from the router to the computer with the server = installed, and the cable modem's (internet connection) IP is forwarding = straight to the router and never reaching the computer with the server = installed. I assume this is a relatively simple fix for any of you that = are knowledgeable with networks, but I can't figure out what to do to = fix this & make it work with my set up. I also cant run the server and = a file sharing program like KazaA or WinMX. Is there a way to allow for = these programs and the server to all run together harmoniously? Thanks = in advance for any help, and I apologize if this question has already = been beaten to death. Steve ------=_NextPart_000_000E_01C3CFD8.B4768E60 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Thanks... I'm sorry to be an uninformed = newbie=20 & keep asking questions, but would it be possible for you to explain = to me=20 how to do this, or what I should do exactly?  I understand = computers &=20 the internet fairly well, but I'm pretty new to networking.  I = found a=20 place in my router's configuration page to forward ports, etc., but I = don't know=20 what I'm doing once I get there.  I also dont know how to assign an = internal IP address, or what to do with it once that's been = done.
 
Thanks again for the help,
Steve
----- Original Message -----
From:=20 Day=20 Tooley
To: xitami@lists.xitami.org =
Sent: Wednesday, December 31, = 2003 12:30=20 PM
Subject: Re: [Xitami] Running = server=20 through a router

Looks like you will need to = port-forward port 80=20 in your router to your Windows hosting machine.  Also, you will = need to=20 permanently assign an internal IP address to your hosting=20 machine.

~~~~~~~~~~~~~~~~~~~~~~~~~~~
Day Tooley
Webfoot@EasyStreet.com
 
When the game is over, both the king and the pawn are put into = the same=20 box.
 
 
----- Original Message -----
From:=20 Steven L.=20 Haas
To: xitami@lists.xitami.org =
Sent: Wednesday, December 31, = 2003 7:00=20 AM
Subject: [Xitami] Running = server=20 through a router

I am trying to run the Xitami web = server on my=20 WIndows XP machine that is connected to the internet via a cable = modem=20 (RoadRunner/Motorola Surboard).  The internet connection is = split=20 amongst 2 computers using a Linksys router.  When I start the = web=20 server everything seems fine, but when I try to access the web page = I have=20 loaded on the server by connecting to my internet connection's = (cable modem)=20 IP address, I am directed to the router's configuration page.  = This=20 also happens when the server is turned off, so it's not a big = suprise. =20 What is odd is that when I try to connect to the router's config = page by=20 entering the router's default IP address into IE, I am not taken to = the=20 config page as usual, but I'm instead directed to the web page I = have=20 installed on the Xitami web server.  When the web server is = turned off=20 I go straight to the config page as expected.  It seems like = somehow=20 the router's IP is bouncing me back from the router to the computer = with the=20 server installed, and the cable modem's (internet connection) IP is=20 forwarding straight to the router and never reaching the computer = with the=20 server installed.  I assume this is a relatively simple = fix for=20 any of you that are knowledgeable with networks, but I can't figure = out what=20 to do to fix this & make it work with my set up.  I = also cant=20 run the server and a file sharing program like KazaA or WinMX.  = Is=20 there a way to allow for these programs and the server to all run = together=20 harmoniously?  Thanks in advance for any help, and I apologize = if this=20 question has already been beaten to death.
 
Steve
------=_NextPart_000_000E_01C3CFD8.B4768E60-- From xitami@lists.xitami.org Thu Jan 1 02:19:09 2004 From: xitami@lists.xitami.org (Real Martel) Date: Wed, 31 Dec 2003 19:19:09 -0700 Subject: [Xitami] Running server through a router In-Reply-To: Message-ID: This is a multi-part message in MIME format. --Boundary_(ID_DIN3deeMOceEDyNs80NBcQ) Content-type: text/plain; charset=iso-8859-1 Content-transfer-encoding: 7BIT Hi Steve, Maybe it would be best to really understand what your router does for you. I'm not familiar with the Linksys, I personally have D-Link. So details may vary, but the jist of the story should be fairly familiar. I am, by no means, an expert, but here's my take on it. When someone sends a request to your domain name, say www.mydomain.com, it really goes to an IP number, connected to the internet, say, 24.86.62.150 (don't try this address, I just made it up). Now, that would be, in our example, the IP address of your router. What your router does with that request, is that it looks up in its list of information to see if the requests for the port specified should be redirected somewhere. So let's assume this was a webpage request, on port 80. Your router needs to know to which computer to forward that request. So say it goes to your computer at 192.168.0.121. The router will take that ip packet, and forward it to that "behind the wall" address to be dealt with. What you need to tell your router, is that whenever there is a packet coming in for port 80 (the standard port for web servers), it needs to be forwarded to 192.168.0.121 (or whichever LAN IP number your computer has. I hope this is helping you. Cheers, Real Martel -----Original Message----- From: xitami-admin@lists.xitami.org [mailto:xitami-admin@lists.xitami.org]On Behalf Of Steven L. Haas Sent: Wednesday, December 31, 2003 7:00 PM To: xitami@lists.xitami.org Subject: Re: [Xitami] Running server through a router Thanks... I'm sorry to be an uninformed newbie & keep asking questions, but would it be possible for you to explain to me how to do this, or what I should do exactly? I understand computers & the internet fairly well, but I'm pretty new to networking. I found a place in my router's configuration page to forward ports, etc., but I don't know what I'm doing once I get there. I also dont know how to assign an internal IP address, or what to do with it once that's been done. Thanks again for the help, Steve ----- Original Message ----- From: Day Tooley To: xitami@lists.xitami.org Sent: Wednesday, December 31, 2003 12:30 PM Subject: Re: [Xitami] Running server through a router Looks like you will need to port-forward port 80 in your router to your Windows hosting machine. Also, you will need to permanently assign an internal IP address to your hosting machine. ~~~~~~~~~~~~~~~~~~~~~~~~~~~ Day Tooley Webfoot@EasyStreet.com When the game is over, both the king and the pawn are put into the same box. ----- Original Message ----- From: Steven L. Haas To: xitami@lists.xitami.org Sent: Wednesday, December 31, 2003 7:00 AM Subject: [Xitami] Running server through a router I am trying to run the Xitami web server on my WIndows XP machine that is connected to the internet via a cable modem (RoadRunner/Motorola Surboard). The internet connection is split amongst 2 computers using a Linksys router. When I start the web server everything seems fine, but when I try to access the web page I have loaded on the server by connecting to my internet connection's (cable modem) IP address, I am directed to the router's configuration page. This also happens when the server is turned off, so it's not a big suprise. What is odd is that when I try to connect to the router's config page by entering the router's default IP address into IE, I am not taken to the config page as usual, but I'm instead directed to the web page I have installed on the Xitami web server. When the web server is turned off I go straight to the config page as expected. It seems like somehow the router's IP is bouncing me back from the router to the computer with the server installed, and the cable modem's (internet connection) IP is forwarding straight to the router and never reaching the computer with the server installed. I assume this is a relatively simple fix for any of you that are knowledgeable with networks, but I can't figure out what to do to fix this & make it work with my set up. I also cant run the server and a file sharing program like KazaA or WinMX. Is there a way to allow for these programs and the server to all run together harmoniously? Thanks in advance for any help, and I apologize if this question has already been beaten to death. Steve --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.557 / Virus Database: 349 - Release Date: 12/30/03 --Boundary_(ID_DIN3deeMOceEDyNs80NBcQ) Content-type: text/html; charset=iso-8859-1 Content-transfer-encoding: 7BIT
Hi Steve,
 
Maybe it would be best to really understand what your router does for you.  I'm not familiar with the Linksys, I personally have D-Link. So details may vary, but the jist of the story should be fairly familiar.  I am, by no means, an expert, but here's my take on it.
 
When someone sends a request to your domain name, say www.mydomain.com, it really goes to an IP number, connected to the internet, say, 24.86.62.150 (don't try this address, I just made it up). Now, that would be, in our example, the IP address of your router.
 
What your router does with that request, is that it looks up in its list of information to see if the requests for the port specified should be redirected somewhere. So let's assume this was a webpage request, on port 80. Your router needs to know to which computer to forward that request. So say it goes to your computer at 192.168.0.121. The router will take that ip packet, and forward it to that "behind the wall" address to be dealt with.
 
What you need to tell your router, is that whenever there is a packet coming in for port 80 (the standard port for web servers), it needs to be forwarded to 192.168.0.121 (or whichever LAN IP number your computer has.
 
I hope this is helping you.
 
Cheers,
 
Real Martel
 
-----Original Message-----
From: xitami-admin@lists.xitami.org [mailto:xitami-admin@lists.xitami.org]On Behalf Of Steven L. Haas
Sent: Wednesday, December 31, 2003 7:00 PM
To: xitami@lists.xitami.org
Subject: Re: [Xitami] Running server through a router

Thanks... I'm sorry to be an uninformed newbie & keep asking questions, but would it be possible for you to explain to me how to do this, or what I should do exactly?  I understand computers & the internet fairly well, but I'm pretty new to networking.  I found a place in my router's configuration page to forward ports, etc., but I don't know what I'm doing once I get there.  I also dont know how to assign an internal IP address, or what to do with it once that's been done.
 
Thanks again for the help,
Steve
----- Original Message -----
From: Day Tooley
Sent: Wednesday, December 31, 2003 12:30 PM
Subject: Re: [Xitami] Running server through a router

Looks like you will need to port-forward port 80 in your router to your Windows hosting machine.  Also, you will need to permanently assign an internal IP address to your hosting machine.

~~~~~~~~~~~~~~~~~~~~~~~~~~~
Day Tooley
Webfoot@EasyStreet.com
 
When the game is over, both the king and the pawn are put into the same box.
 
 
----- Original Message -----
Sent: Wednesday, December 31, 2003 7:00 AM
Subject: [Xitami] Running server through a router

I am trying to run the Xitami web server on my WIndows XP machine that is connected to the internet via a cable modem (RoadRunner/Motorola Surboard).  The internet connection is split amongst 2 computers using a Linksys router.  When I start the web server everything seems fine, but when I try to access the web page I have loaded on the server by connecting to my internet connection's (cable modem) IP address, I am directed to the router's configuration page.  This also happens when the server is turned off, so it's not a big suprise.  What is odd is that when I try to connect to the router's config page by entering the router's default IP address into IE, I am not taken to the config page as usual, but I'm instead directed to the web page I have installed on the Xitami web server.  When the web server is turned off I go straight to the config page as expected.  It seems like somehow the router's IP is bouncing me back from the router to the computer with the server installed, and the cable modem's (internet connection) IP is forwarding straight to the router and never reaching the computer with the server installed.  I assume this is a relatively simple fix for any of you that are knowledgeable with networks, but I can't figure out what to do to fix this & make it work with my set up.  I also cant run the server and a file sharing program like KazaA or WinMX.  Is there a way to allow for these programs and the server to all run together harmoniously?  Thanks in advance for any help, and I apologize if this question has already been beaten to death.
 
Steve
--Boundary_(ID_DIN3deeMOceEDyNs80NBcQ)-- From xitami@lists.xitami.org Thu Jan 1 05:12:31 2004 From: xitami@lists.xitami.org (Roger Brown) Date: Thu, 1 Jan 2004 16:12:31 +1100 Subject: [Xitami] Running server through a router In-Reply-To: References: <004f01c3cfcc$2c462b60$56d1a2d1@esactive.easystreet.com> Message-ID: <1553343509.20040101161231@rogerbrown.no-ip.org> Hello Steven, Thursday, January 1, 2004, 1:00:14 PM, you wrote: > I found a place in my router's configuration page to forward > ports, etc., but I don't know what I'm doing once I get there. I > also dont know how to assign an internal IP address, or what to do > with it once that's been done. Try this site http://ozcableguy.com/routerfaq.html#2.11 - the whole site is excellent reading to understand routers and networking. Read the port forwarding thoroughly - you'll need to use this to get Kazaa running as well. To assign an IP all you need to do is change the connection properties on the PC running the web server from "obtain IP automatically" to manually specifying the IP you want. (in XP or Win2k - right click the connection icon, Status, Properties (button), Internet Protocol (highlight this), Properties (button)) Make sure the IP you choose matches the IP and subnet of your router's internal IP - eg. router 192.168.0.1 PC running server 192.168.0.2 subnet 255.255.255.0 OR (say) router 10.0.0.1 PC 10.0.0.2 subnet 255.255.255.0 (ie it depends on your router) -- Regards, Roger Roger Brown roger2@rogerbrown.no-ip.org http://rogerbrown.no-ip.org http://member.melbpc.org.au/~robrown/ From xitami@lists.xitami.org Thu Jan 1 20:11:22 2004 From: xitami@lists.xitami.org (Charles Schmidling) Date: Thu, 1 Jan 2004 12:11:22 -0800 Subject: [Xitami] Running server through a router References: Message-ID: <003101c3d0a3$6d6220e0$6401a80a@comcast.net> This is a multi-part message in MIME format. ------=_NextPart_000_002E_01C3D060.5F04E520 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Steven, Except for OS differences, I already do what you want to do with a = Linksys wireless cable router. This is what you do. First, determine the internal IP address for the network card that is = attached to your router. Each card or interface can actually have its = own address (used or not). Click "Networks" in the system tray and = choose "ethernet". In one of those tabs, it has your configurations = settings (don't have an XP on me right now so shooting from memory). = Write down your IP address, the gateway, mask, and DNS addresses. It is = possible to use that IP in your router settings, but it is technically = dynamic (changeable) so it would be wise to set it to a static address, = but you can do it later. You can also run "IPCONFIG" to get this info, = as long as you choose the correct interface. The reason I'm suggesting using your current IP address is just to get = it running. When you set your address manually, you must also set the = gateway (your router), mask (that 255.255.x.x number), and the Domain = Name lookup (DNS) addresses. Since you set these up manually, no = request is made to the DHCP server for this stuff. Also, choose an = address the mask likes. Now, armed with your notes, go into your router's setup. Usually you = enter its IP (198.168.1.1) or whatever and password. Choose the = ADVANCED tab then "DMZ Host". Enter your server's IP address here and = apply it. Your server is now open to the world - completely open. As if it were = the only computer connected to the modem. The DMZ Host will direct ALL = traffic to this machine so a firewall is REALLY important! All your = peer sharing stuff should also work now for the same reason. Test that it works before setting up a manual IP address, remembering to = include the the gateway, mask and DNS host addresses in the server's = settings. You will need to change the DMZ address before it works = again. Rebooting may also help. You could have setup Port Forwarding to forward a range of ports to this = server, but why. Port Forwarding will be useful if you have different = computer perform different tasks. Mail here, DB there, FTP to that one, = etc... Then you need to know who does what to which port. Right now = its a simple application with a simple solution, mostly. Happy Multitasking, Charles ----- Original Message -----=20 From: Steven L. Haas=20 To: xitami@lists.xitami.org=20 Sent: Wednesday, December 31, 2003 7:00 AM Subject: [Xitami] Running server through a router I am trying to run the Xitami web server on my WIndows XP machine that = is connected to the internet via a cable modem (RoadRunner/Motorola = Surboard). The internet connection is split amongst 2 computers using a = Linksys router. When I start the web server everything seems fine, but = when I try to access the web page I have loaded on the server by = connecting to my internet connection's (cable modem) IP address, I am = directed to the router's configuration page. This also happens when the = server is turned off, so it's not a big suprise. What is odd is that = when I try to connect to the router's config page by entering the = router's default IP address into IE, I am not taken to the config page = as usual, but I'm instead directed to the web page I have installed on = the Xitami web server. When the web server is turned off I go straight = to the config page as expected. It seems like somehow the router's IP = is bouncing me back from the router to the computer with the server = installed, and the cable modem's (internet connection) IP is forwarding = straight to the router and never reaching the computer with the server = installed. I assume this is a relatively simple fix for any of you that = are knowledgeable with networks, but I can't figure out what to do to = fix this & make it work with my set up. I also cant run the server and = a file sharing program like KazaA or WinMX. Is there a way to allow for = these programs and the server to all run together harmoniously? Thanks = in advance for any help, and I apologize if this question has already = been beaten to death. Steve ------=_NextPart_000_002E_01C3D060.5F04E520 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Steven,
 
Except for OS differences, I already do what you want to do with a = Linksys=20 wireless cable router.  This is what you do.
 
First, determine the internal IP address for the network card = that is=20 attached to your router.  Each card or interface can actually = have its=20 own address (used or not).  Click "Networks" in the system = tray  and=20 choose "ethernet".  In one of those tabs, it has your=20 configurations settings (don't have an XP on me right now so = shooting from=20 memory).  Write down your IP address, the gateway, mask, and DNS=20 addresses.  It is possible to use that IP in your router settings, = but it=20 is technically dynamic (changeable) so it would be wise to set = it to a=20 static address, but you can do it later.  You can also run = "IPCONFIG" to=20 get this info, as long as you choose the correct interface.
 
The reason I'm suggesting using your current IP address is = just to get=20 it running.  When you set your address manually, you=20 must also set the gateway (your router), mask (that = 255.255.x.x=20 number), and the Domain Name lookup (DNS) addresses.  Since you set = these=20 up manually, no request is made to the DHCP server for this stuff.  = Also,=20 choose an address the mask likes.
 
Now, armed with your notes, go into your router's = setup. =20 Usually you enter its IP (198.168.1.1) or whatever and password.  = Choose=20 the ADVANCED tab then "DMZ Host".  Enter your server's IP = address here=20 and apply it.
 
Your server is now open to the world - completely open.  As if = it were=20 the only computer connected to the modem.  The DMZ Host will=20 direct ALL traffic to this machine so a firewall is REALLY=20 important!  All your peer sharing stuff should also work = now for the=20 same reason.
 
Test that it works before setting up a manual IP address, = remembering to=20 include the the gateway, mask and DNS host addresses in the = server's=20 settings.  You will need to change the DMZ address before it works=20 again.  Rebooting may also help.
 
You could have setup Port Forwarding to forward a range of ports to = this=20 server, but why.  Port Forwarding will be useful if you have = different=20 computer perform different tasks.  Mail here, DB there, FTP to = that=20 one, etc...  Then you need to know who does what to which = port.  Right=20 now its a simple application with a simple solution, mostly.
 
Happy Multitasking,
Charles
 
----- Original Message -----
From:=20 Steven L.=20 Haas
Sent: Wednesday, December 31, = 2003 7:00=20 AM
Subject: [Xitami] Running = server through=20 a router

I am trying to run the Xitami web = server on my=20 WIndows XP machine that is connected to the internet via a cable modem = (RoadRunner/Motorola Surboard).  The internet connection is split = amongst=20 2 computers using a Linksys router.  When I start the web server=20 everything seems fine, but when I try to access the web page I have = loaded on=20 the server by connecting to my internet connection's (cable modem) IP = address,=20 I am directed to the router's configuration page.  This also = happens when=20 the server is turned off, so it's not a big suprise.  What is odd = is that=20 when I try to connect to the router's config page by entering the = router's=20 default IP address into IE, I am not taken to the config page as = usual, but=20 I'm instead directed to the web page I have installed on the Xitami = web=20 server.  When the web server is turned off I go straight to the = config=20 page as expected.  It seems like somehow the router's IP is = bouncing me=20 back from the router to the computer with the server installed, and = the cable=20 modem's (internet connection) IP is forwarding straight to the router = and=20 never reaching the computer with the server installed.  I assume = this is=20 a relatively simple fix for any of you that are knowledgeable = with=20 networks, but I can't figure out what to do to fix this & = make it=20 work with my set up.  I also cant run the server and a file = sharing=20 program like KazaA or WinMX.  Is there a way to allow for these = programs=20 and the server to all run together harmoniously?  Thanks in = advance for=20 any help, and I apologize if this question has already been beaten to=20 death.
 
Steve
------=_NextPart_000_002E_01C3D060.5F04E520-- From xitami@lists.xitami.org Sun Jan 4 02:16:34 2004 From: xitami@lists.xitami.org (Paul C. Fretz) Date: Sat, 03 Jan 2004 21:16:34 -0500 Subject: [Xitami] Web Pages Password Question Message-ID: <3.0.6.32.20040103211634.007d5810@206.139.214.11> With Xitami (Win32) web server I would like to password protect a folder (subdirectory) for public access and at the same time have this folder available without passwords on selected IP addresses (our LAN). Is this possible and how can it be done? In other words in xitami.aut I would like to do both of the following at the same time: [SpecialFolder] PublicUser=Secret # Password for public access [SpecialFolder] All=* # Allow all local users Webmask=192.1.2.* # to access this without a password -Paul From xitami@lists.xitami.org Tue Jan 6 05:58:15 2004 From: xitami@lists.xitami.org (ArcGames1) Date: Tue, 6 Jan 2004 00:58:15 -0500 Subject: [Xitami] Problems using CGI and PHP on Xitami Message-ID: <000e01c3d41a$19b004b0$a1b7fea9@CUNNINGHAM> This is a multi-part message in MIME format. ------=_NextPart_000_000B_01C3D3F0.2AF27390 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I am using Xitami version 2.5b6 on Windows XP (home edition), I have = Active Perl 5.6 and PHP 4.3 installed as well. I am using some scripts = (some are cgi / perl and some are PHP). These scripts are used to post = messages, access restricted parts of my site, etc..etc, the problem is = this (using the message posting script for an example) I type in my = message, click submit, and it goes to an HTTP 404 Error page. But if I = go back to the page where I can view the messages, they are there, it = posted them. Why does it go to this HTML 404 Error message page, and how = can I get it to work correctly? One note: I used all these scripts with another webserver I use to have = on my system before I got Xitami and they worked fine. Please help? -David Cunningham ------=_NextPart_000_000B_01C3D3F0.2AF27390 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
I am using Xitami version 2.5b6 on Windows XP (home edition), I have = Active Perl=20 5.6 and PHP 4.3 installed as well. I am using some scripts (some are cgi = / perl=20 and some are PHP).  These scripts are used to post messages, access = restricted parts of my site, etc..etc, the problem is this (using the = message=20 posting script for an example) I type in my message, click submit, and = it goes=20 to an HTTP 404 Error page. But if I go back to the page where I can view = the=20 messages, they are there, it posted them. Why does it go to this HTML = 404 Error=20 message page, and how can I get it to work = correctly?
 
One note: I used all these scripts with another = webserver I=20 use to have on my system before I got Xitami and they worked = fine.
 
Please help?
-David Cunningham
------=_NextPart_000_000B_01C3D3F0.2AF27390-- From xitami@lists.xitami.org Tue Jan 6 06:00:14 2004 From: xitami@lists.xitami.org (ArcGames1) Date: Tue, 6 Jan 2004 01:00:14 -0500 Subject: [Xitami] Virtual Host And Bandwidth Message-ID: <001701c3d41a$5a525810$a1b7fea9@CUNNINGHAM> This is a multi-part message in MIME format. ------=_NextPart_000_0014_01C3D3F0.713E5CB0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I use Xitami version 2.5b6 on Windows Xp (home edition), how can I limit = bandwidth to a certain amount for each Virtual Host? ------=_NextPart_000_0014_01C3D3F0.713E5CB0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
I use Xitami version 2.5b6 on Windows = Xp (home=20 edition), how can I limit bandwidth to a certain amount for each Virtual = Host?
------=_NextPart_000_0014_01C3D3F0.713E5CB0-- From xitami@lists.xitami.org Tue Jan 6 08:16:56 2004 From: xitami@lists.xitami.org (Steven L. Haas) Date: Tue, 6 Jan 2004 02:16:56 -0600 Subject: [Xitami] Running server through a router References: Message-ID: This is a multi-part message in MIME format. ------=_NextPart_000_000E_01C3D3FB.28A65FB0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Sorry for the repost guys... I lost he responses I got back to this = query, and I was hoping that those of you that replied (or anyone with = the messages) would please re-send the messages. There were 2 in = particular that offered me a lot of specific help in my quest to get = this web server & other applications working. I know they would've been = enough to get at least Xitami working, and Im frustrated that I lost it. Thanks again, Steve ----- Original Message -----=20 From: Steven L. Haas=20 To: xitami@lists.xitami.org=20 Sent: Wednesday, December 31, 2003 9:00 AM Subject: [Xitami] Running server through a router I am trying to run the Xitami web server on my WIndows XP machine that = is connected to the internet via a cable modem (RoadRunner/Motorola = Surboard). The internet connection is split amongst 2 computers using a = Linksys router. When I start the web server everything seems fine, but = when I try to access the web page I have loaded on the server by = connecting to my internet connection's (cable modem) IP address, I am = directed to the router's configuration page. This also happens when the = server is turned off, so it's not a big suprise. What is odd is that = when I try to connect to the router's config page by entering the = router's default IP address into IE, I am not taken to the config page = as usual, but I'm instead directed to the web page I have installed on = the Xitami web server. When the web server is turned off I go straight = to the config page as expected. It seems like somehow the router's IP = is bouncing me back from the router to the computer with the server = installed, and the cable modem's (internet connection) IP is forwarding = straight to the router and never reaching the computer with the server = installed. I assume this is a relatively simple fix for any of you that = are knowledgeable with networks, but I can't figure out what to do to = fix this & make it work with my set up. I also cant run the server and = a file sharing program like KazaA or WinMX. Is there a way to allow for = these programs and the server to all run together harmoniously? Thanks = in advance for any help, and I apologize if this question has already = been beaten to death. Steve ------=_NextPart_000_000E_01C3D3FB.28A65FB0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Sorry for the repost guys...  I = lost he=20 responses I got back to this query, and I was hoping that those of you = that=20 replied (or anyone with the messages) would please re-send the = messages. =20 There were 2 in particular that offered me a lot of specific help in my = quest to=20 get this web server & other applications working.  I know they = would've=20 been enough to get at least Xitami working, and Im frustrated that I = lost=20 it.
 
Thanks again,
Steve
----- Original Message -----
From:=20 Steven L.=20 Haas
Sent: Wednesday, December 31, = 2003 9:00=20 AM
Subject: [Xitami] Running = server through=20 a router

I am trying to run the Xitami web = server on my=20 WIndows XP machine that is connected to the internet via a cable modem = (RoadRunner/Motorola Surboard).  The internet connection is split = amongst=20 2 computers using a Linksys router.  When I start the web server=20 everything seems fine, but when I try to access the web page I have = loaded on=20 the server by connecting to my internet connection's (cable modem) IP = address,=20 I am directed to the router's configuration page.  This also = happens when=20 the server is turned off, so it's not a big suprise.  What is odd = is that=20 when I try to connect to the router's config page by entering the = router's=20 default IP address into IE, I am not taken to the config page as = usual, but=20 I'm instead directed to the web page I have installed on the Xitami = web=20 server.  When the web server is turned off I go straight to the = config=20 page as expected.  It seems like somehow the router's IP is = bouncing me=20 back from the router to the computer with the server installed, and = the cable=20 modem's (internet connection) IP is forwarding straight to the router = and=20 never reaching the computer with the server installed.  I assume = this is=20 a relatively simple fix for any of you that are knowledgeable = with=20 networks, but I can't figure out what to do to fix this & = make it=20 work with my set up.  I also cant run the server and a file = sharing=20 program like KazaA or WinMX.  Is there a way to allow for these = programs=20 and the server to all run together harmoniously?  Thanks in = advance for=20 any help, and I apologize if this question has already been beaten to=20 death.
 
Steve
------=_NextPart_000_000E_01C3D3FB.28A65FB0-- From xitami@lists.xitami.org Tue Jan 6 13:28:58 2004 From: xitami@lists.xitami.org (Andris Kluga) Date: Tue, 6 Jan 2004 15:28:58 +0200 Subject: [Xitami] Web Pages Password Question Message-ID: <874ED0D1CBC5CF4C9236A4B7B6C488D0A79AD3@riga.microlink.lv> Hi! Paul C. Fretz writes: > With Xitami (Win32) web server I would like to password > protect a folder > (subdirectory) for public access and at the same time have this folder > available without passwords on selected IP addresses (our > LAN). Is this > possible and how can it be done? No. One way for workaround is - to use virtual hosts. In one host make access for LAN only (without password); in second - access for every address, but with password. Best wishes! Andris From xitami@lists.xitami.org Tue Jan 6 16:24:04 2004 From: xitami@lists.xitami.org (Day Tooley) Date: Tue, 6 Jan 2004 08:24:04 -0800 Subject: [Xitami] Problems using CGI and PHP on Xitami References: <000e01c3d41a$19b004b0$a1b7fea9@CUNNINGHAM> Message-ID: <001d01c3d471$80523510$56d1a2d1@esactive.easystreet.com> This is a multi-part message in MIME format. ------=_NextPart_000_0019_01C3D42E.71FB13D0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit My guess would be that the script contains a reference to a 'success page' that isn't there on your new installation. Does the 404 error message indicate which page is not found? ~~~~~~~~~~~~~~~~~~~~~~~~~~~ Day Tooley Webfoot@EasyStreet.com When the game is over, both the king and the pawn are put into the same box. ----- Original Message ----- From: ArcGames1 To: xitami@lists.xitami.org Sent: Monday, January 05, 2004 9:58 PM Subject: [Xitami] Problems using CGI and PHP on Xitami I am using Xitami version 2.5b6 on Windows XP (home edition), I have Active Perl 5.6 and PHP 4.3 installed as well. I am using some scripts (some are cgi / perl and some are PHP). These scripts are used to post messages, access restricted parts of my site, etc..etc, the problem is this (using the message posting script for an example) I type in my message, click submit, and it goes to an HTTP 404 Error page. But if I go back to the page where I can view the messages, they are there, it posted them. Why does it go to this HTML 404 Error message page, and how can I get it to work correctly? One note: I used all these scripts with another webserver I use to have on my system before I got Xitami and they worked fine. Please help? -David Cunningham ------=_NextPart_000_0019_01C3D42E.71FB13D0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
My guess would be that the script = contains a=20 reference to a 'success page' that isn't there on your new = installation. =20 Does the 404 error message indicate which page is not = found?

~~~~~~~~~~~~~~~~~~~~~~~~~~~
Day Tooley
Webfoot@EasyStreet.com
 
When the game is over, both the king and the pawn are put into the = same=20 box.
 
 
----- Original Message -----
From:=20 ArcGames1
Sent: Monday, January 05, 2004 = 9:58=20 PM
Subject: [Xitami] Problems = using CGI and=20 PHP on Xitami

I am using Xitami version 2.5b6 on Windows XP (home edition), I have = Active Perl=20 5.6 and PHP 4.3 installed as well. I am using some scripts (some are = cgi /=20 perl and some are PHP).  These scripts are used to post messages, = access=20 restricted parts of my site, etc..etc, the problem is this (using the = message=20 posting script for an example) I type in my message, click submit, and = it goes=20 to an HTTP 404 Error page. But if I go back to the page where I can = view the=20 messages, they are there, it posted them. Why does it go to this HTML = 404=20 Error message page, and how can I get it to work=20 correctly?
 
One note: I used all these scripts with another = webserver I=20 use to have on my system before I got Xitami and they worked=20 fine.
 
Please help?
-David = Cunningham
------=_NextPart_000_0019_01C3D42E.71FB13D0-- From xitami@lists.xitami.org Tue Jan 6 17:30:15 2004 From: xitami@lists.xitami.org (Charles Schmidling) Date: Tue, 6 Jan 2004 09:30:15 -0800 Subject: [Xitami] Running server through a router References: Message-ID: <003501c3d47a$bfb33fc0$6401a80a@comcast.net> This is a multi-part message in MIME format. ------=_NextPart_000_0032_01C3D437.B0E82700 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Okay - reposting -=20 Steven, Except for OS differences, I already do what you want to do with a = Linksys wireless cable router. This is what you do. First, determine the internal IP address for the network card that is = attached to your router. Each card or interface can actually have its = own address (used or not). Click "Networks" in the system tray and = choose "ethernet". In one of those tabs, it has your configurations = settings (don't have an XP on me right now so shooting from memory). = Write down your IP address, the gateway, mask, and DNS addresses. It is = possible to use that IP in your router settings, but it is technically = dynamic (changeable) so it would be wise to set it to a static address, = but you can do it later. You can also run "IPCONFIG" to get this info, = as long as you choose the correct interface. The reason I'm suggesting using your current IP address is just to get = it running. When you set your address manually, you must also set the = gateway (your router), mask (that 255.255.x.x number), and the Domain = Name lookup (DNS) addresses. Since you set these up manually, no = request is made to the DHCP server for this stuff. Also, choose an = address the mask likes. Now, armed with your notes, go into your router's setup. Usually you = enter its IP (198.168.1.1) or whatever and password. Choose the = ADVANCED tab then "DMZ Host". Enter your server's IP address here and = apply it. Your server is now open to the world - completely open. As if it were = the only computer connected to the modem. The DMZ Host will direct ALL = traffic to this machine so a firewall is REALLY important! All your = peer sharing stuff should also work now for the same reason. Test that it works before setting up a manual IP address, remembering to = include the the gateway, mask and DNS host addresses in the server's = settings. You will need to change the DMZ address before it works = again. Rebooting may also help. You could have setup Port Forwarding to forward a range of ports to this = server, but why. Port Forwarding will be useful if you have different = computer perform different tasks. Mail here, DB there, FTP to that one, = etc... Then you need to know who does what to which port. Right now = its a simple application with a simple solution, mostly. Much luck, Charles ----- Original Message -----=20 From: Steven L. Haas=20 To: xitami@lists.xitami.org=20 Sent: Tuesday, January 06, 2004 12:16 AM Subject: Re: [Xitami] Running server through a router Sorry for the repost guys... I lost he responses I got back to this = query, and I was hoping that those of you that replied (or anyone with = the messages) would please re-send the messages. There were 2 in = particular that offered me a lot of specific help in my quest to get = this web server & other applications working. I know they would've been = enough to get at least Xitami working, and Im frustrated that I lost it. Thanks again, Steve ------=_NextPart_000_0032_01C3D437.B0E82700 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Okay - reposting -
 
Steven,
 
Except for OS differences, I already do what you want to do with a = Linksys=20 wireless cable router.  This is what you do.
 
First, determine the internal IP address for the network card = that is=20 attached to your router.  Each card or interface can actually = have its=20 own address (used or not).  Click "Networks" in the system = tray  and=20 choose "ethernet".  In one of those tabs, it has your=20 configurations settings (don't have an XP on me right now so = shooting from=20 memory).  Write down your IP address, the gateway, mask, and DNS=20 addresses.  It is possible to use that IP in your router settings, = but it=20 is technically dynamic (changeable) so it would be wise to set = it to a=20 static address, but you can do it later.  You can also run = "IPCONFIG" to=20 get this info, as long as you choose the correct interface.
 
The reason I'm suggesting using your current IP address is = just to get=20 it running.  When you set your address manually, you=20 must also set the gateway (your router), mask (that = 255.255.x.x=20 number), and the Domain Name lookup (DNS) addresses.  Since you set = these=20 up manually, no request is made to the DHCP server for this stuff.  = Also,=20 choose an address the mask likes.
 
Now, armed with your notes, go into your router's = setup. =20 Usually you enter its IP (198.168.1.1) or whatever and password.  = Choose=20 the ADVANCED tab then "DMZ Host".  Enter your server's IP = address here=20 and apply it.
 
Your server is now open to the world - completely open.  As if = it were=20 the only computer connected to the modem.  The DMZ Host will=20 direct ALL traffic to this machine so a firewall is REALLY=20 important!  All your peer sharing stuff should also work = now for the=20 same reason.
 
Test that it works before setting up a manual IP address, = remembering to=20 include the the gateway, mask and DNS host addresses in the = server's=20 settings.  You will need to change the DMZ address before it works=20 again.  Rebooting may also help.
 
You could have setup Port Forwarding to forward a range of ports to = this=20 server, but why.  Port Forwarding will be useful if you have = different=20 computer perform different tasks.  Mail here, DB there, FTP to = that=20 one, etc...  Then you need to know who does what to which = port.  Right=20 now its a simple application with a simple solution, mostly.
 
Much luck,
Charles
 
----- Original Message -----
From:=20 Steven L.=20 Haas
Sent: Tuesday, January 06, 2004 = 12:16=20 AM
Subject: Re: [Xitami] Running = server=20 through a router

Sorry for the repost guys...  I = lost he=20 responses I got back to this query, and I was hoping that those of you = that=20 replied (or anyone with the messages) would please re-send the = messages. =20 There were 2 in particular that offered me a lot of specific help in = my quest=20 to get this web server & other applications working.  I know = they=20 would've been enough to get at least Xitami working, and Im frustrated = that I=20 lost it.
 
Thanks again,
Steve
------=_NextPart_000_0032_01C3D437.B0E82700-- From xitami@lists.xitami.org Tue Jan 6 22:52:52 2004 From: xitami@lists.xitami.org (Steven L. Haas) Date: Tue, 6 Jan 2004 16:52:52 -0600 Subject: [Xitami] Running server through a router References: <003501c3d47a$bfb33fc0$6401a80a@comcast.net> Message-ID: This is a multi-part message in MIME format. ------=_NextPart_000_001A_01C3D475.8672ABB0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Thanks guys! ----- Original Message -----=20 From: Charles Schmidling=20 To: xitami@lists.xitami.org=20 Sent: Tuesday, January 06, 2004 11:30 AM Subject: Re: [Xitami] Running server through a router Okay - reposting -=20 Steven, Except for OS differences, I already do what you want to do with a = Linksys wireless cable router. This is what you do. First, determine the internal IP address for the network card that is = attached to your router. Each card or interface can actually have its = own address (used or not). Click "Networks" in the system tray and = choose "ethernet". In one of those tabs, it has your configurations = settings (don't have an XP on me right now so shooting from memory). = Write down your IP address, the gateway, mask, and DNS addresses. It is = possible to use that IP in your router settings, but it is technically = dynamic (changeable) so it would be wise to set it to a static address, = but you can do it later. You can also run "IPCONFIG" to get this info, = as long as you choose the correct interface. The reason I'm suggesting using your current IP address is just to get = it running. When you set your address manually, you must also set the = gateway (your router), mask (that 255.255.x.x number), and the Domain = Name lookup (DNS) addresses. Since you set these up manually, no = request is made to the DHCP server for this stuff. Also, choose an = address the mask likes. Now, armed with your notes, go into your router's setup. Usually you = enter its IP (198.168.1.1) or whatever and password. Choose the = ADVANCED tab then "DMZ Host". Enter your server's IP address here and = apply it. Your server is now open to the world - completely open. As if it were = the only computer connected to the modem. The DMZ Host will direct ALL = traffic to this machine so a firewall is REALLY important! All your = peer sharing stuff should also work now for the same reason. Test that it works before setting up a manual IP address, remembering = to include the the gateway, mask and DNS host addresses in the server's = settings. You will need to change the DMZ address before it works = again. Rebooting may also help. You could have setup Port Forwarding to forward a range of ports to = this server, but why. Port Forwarding will be useful if you have = different computer perform different tasks. Mail here, DB there, FTP to = that one, etc... Then you need to know who does what to which port. = Right now its a simple application with a simple solution, mostly. Much luck, Charles ----- Original Message -----=20 From: Steven L. Haas=20 To: xitami@lists.xitami.org=20 Sent: Tuesday, January 06, 2004 12:16 AM Subject: Re: [Xitami] Running server through a router Sorry for the repost guys... I lost he responses I got back to this = query, and I was hoping that those of you that replied (or anyone with = the messages) would please re-send the messages. There were 2 in = particular that offered me a lot of specific help in my quest to get = this web server & other applications working. I know they would've been = enough to get at least Xitami working, and Im frustrated that I lost it. Thanks again, Steve ------=_NextPart_000_001A_01C3D475.8672ABB0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Thanks guys!
----- Original Message -----
From:=20 Charles Schmidling
Sent: Tuesday, January 06, 2004 = 11:30=20 AM
Subject: Re: [Xitami] Running = server=20 through a router

Okay - reposting -
 
Steven,
 
Except for OS differences, I already do what you want to do with = a=20 Linksys wireless cable router.  This is what you do.
 
First, determine the internal IP address for the network = card that=20 is attached to your router.  Each card or interface = can actually=20 have its own address (used or not).  Click "Networks" in the = system=20 tray  and choose "ethernet".  In one of those tabs, it has = your=20 configurations settings (don't have an XP on me right now so = shooting=20 from memory).  Write down your IP address, the gateway, mask, and = DNS=20 addresses.  It is possible to use that IP in your router = settings, but it=20 is technically dynamic (changeable) so it would be wise to set = it to a=20 static address, but you can do it later.  You can also run = "IPCONFIG" to=20 get this info, as long as you choose the correct interface.
 
The reason I'm suggesting using your current IP address is = just to=20 get it running.  When you set your address manually, you=20 must also set the gateway (your router), mask (that = 255.255.x.x=20 number), and the Domain Name lookup (DNS) addresses.  Since you = set these=20 up manually, no request is made to the DHCP server for this = stuff.  Also,=20 choose an address the mask likes.
 
Now, armed with your notes, go into your router's = setup. =20 Usually you enter its IP (198.168.1.1) or whatever and password.  = Choose=20 the ADVANCED tab then "DMZ Host".  Enter your server's IP = address=20 here and apply it.
 
Your server is now open to the world - completely open.  As = if it=20 were the only computer connected to the modem.  The DMZ Host will = direct ALL traffic to this machine so a firewall is REALLY=20 important!  All your peer sharing stuff should also work = now for the=20 same reason.
 
Test that it works before setting up a manual IP address, = remembering to=20 include the the gateway, mask and DNS host addresses in the = server's=20 settings.  You will need to change the DMZ address before it = works=20 again.  Rebooting may also help.
 
You could have setup Port Forwarding to forward a range of ports = to this=20 server, but why.  Port Forwarding will be useful if you have = different=20 computer perform different tasks.  Mail here, DB there, FTP = to that=20 one, etc...  Then you need to know who does what to which = port. =20 Right now its a simple application with a simple solution, = mostly.
 
Much luck,
Charles
 
----- Original Message -----
From:=20 Steven L.=20 Haas
Sent: Tuesday, January 06, = 2004 12:16=20 AM
Subject: Re: [Xitami] Running = server=20 through a router

Sorry for the repost guys...  = I lost he=20 responses I got back to this query, and I was hoping that those of = you that=20 replied (or anyone with the messages) would please re-send the=20 messages.  There were 2 in particular that offered me a lot of = specific=20 help in my quest to get this web server & other applications=20 working.  I know they would've been enough to get at least = Xitami=20 working, and Im frustrated that I lost it.
 
Thanks again,
Steve
------=_NextPart_000_001A_01C3D475.8672ABB0-- From xitami@lists.xitami.org Tue Jan 6 23:29:58 2004 From: xitami@lists.xitami.org (ArcGames1) Date: Tue, 6 Jan 2004 18:29:58 -0500 Subject: [Xitami] Problems using CGI and PHP on Xitami References: <000e01c3d41a$19b004b0$a1b7fea9@CUNNINGHAM> Message-ID: <001101c3d4ad$02944cd0$a1b7fea9@CUNNINGHAM> This is a multi-part message in MIME format. ------=_NextPart_000_000E_01C3D483.169F9FB0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable No, that's not the case. Could there be something else? ----- Original Message -----=20 From: ArcGames1=20 To: xitami@lists.xitami.org=20 Sent: Tuesday, January 06, 2004 12:58 AM Subject: [Xitami] Problems using CGI and PHP on Xitami I am using Xitami version 2.5b6 on Windows XP (home edition), I have = Active Perl 5.6 and PHP 4.3 installed as well. I am using some scripts = (some are cgi / perl and some are PHP). These scripts are used to post = messages, access restricted parts of my site, etc..etc, the problem is = this (using the message posting script for an example) I type in my = message, click submit, and it goes to an HTTP 404 Error page. But if I = go back to the page where I can view the messages, they are there, it = posted them. Why does it go to this HTML 404 Error message page, and how = can I get it to work correctly? One note: I used all these scripts with another webserver I use to = have on my system before I got Xitami and they worked fine. Please help? -David Cunningham ------=_NextPart_000_000E_01C3D483.169F9FB0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
No, that's not the case.
 
Could there be something = else?
----- Original Message -----
From:=20 ArcGames1
Sent: Tuesday, January 06, 2004 = 12:58=20 AM
Subject: [Xitami] Problems = using CGI and=20 PHP on Xitami

I am using Xitami version 2.5b6 on Windows XP (home edition), I have = Active Perl=20 5.6 and PHP 4.3 installed as well. I am using some scripts (some are = cgi /=20 perl and some are PHP).  These scripts are used to post messages, = access=20 restricted parts of my site, etc..etc, the problem is this (using the = message=20 posting script for an example) I type in my message, click submit, and = it goes=20 to an HTTP 404 Error page. But if I go back to the page where I can = view the=20 messages, they are there, it posted them. Why does it go to this HTML = 404=20 Error message page, and how can I get it to work=20 correctly?
 
One note: I used all these scripts with another = webserver I=20 use to have on my system before I got Xitami and they worked=20 fine.
 
Please help?
-David = Cunningham
------=_NextPart_000_000E_01C3D483.169F9FB0-- From xitami@lists.xitami.org Mon Jan 12 16:51:40 2004 From: xitami@lists.xitami.org (Jerald Metz) Date: Mon, 12 Jan 2004 10:51:40 -0600 Subject: [Xitami] Problems with Admin password Message-ID: This is a multi-part message in MIME format. ------=_NextPart_000_0020_01C3D8FA.0F0204C0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hello, I am trying to set up Xitami 2.5c1 on windows XP. I have read through = the documentation, and in theory understand that I need to make = modifications to the xitami.aut file to log into the admin pages... but = nothing I've tried is working. Perhaps I don't have the syntax right? =20 Thanks! Jerry ------=_NextPart_000_0020_01C3D8FA.0F0204C0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Hello,
 
I am trying to set up Xitami 2.5c1 on = windows=20 XP.  I have read through the documentation, and in theory = understand that I=20 need to make modifications to the xitami.aut file to log into the admin = pages...=20 but nothing I've tried is working.
 
Perhaps I don't have the syntax = right? =20
 
Thanks!
Jerry
------=_NextPart_000_0020_01C3D8FA.0F0204C0-- From xitami@lists.xitami.org Mon Jan 12 17:14:02 2004 From: xitami@lists.xitami.org (Marc Doigny) Date: Mon, 12 Jan 2004 18:14:02 +0100 Subject: [Xitami] Problems with Admin password In-Reply-To: Message-ID: <5.1.0.14.2.20040112181301.0232fd20@verfaillie4.verfaillie.local> I think you should modify the default.aut instead of the xitami.aut At 17:51 12/01/04, you wrote: >Hello, > >I am trying to set up Xitami 2.5c1 on windows XP. I have read through the >documentation, and in theory understand that I need to make modifications >to the xitami.aut file to log into the admin pages... but nothing I've >tried is working. > >Perhaps I don't have the syntax right? > >Thanks! >Jerry --::Mailserver Verfaillie Bauwens::-- contact [postmaster@verfaillie.com] Alle mails gecontroleerd op virussen. Virusdefinities dagelijks aangepast. http://www.verfaillie.com From xitami@lists.xitami.org Tue Jan 13 04:11:17 2004 From: xitami@lists.xitami.org (Jerald Metz) Date: Mon, 12 Jan 2004 22:11:17 -0600 Subject: [Xitami] Problems with Admin password References: <5.1.0.14.2.20040112181301.0232fd20@verfaillie4.verfaillie.local> Message-ID: Thank you! Creating that file solved my problems. Thanks! Jerry ----- Original Message ----- From: "Marc Doigny" To: Sent: Monday, January 12, 2004 11:14 AM Subject: Re: [Xitami] Problems with Admin password > I think you should modify the default.aut instead of the xitami.aut > > > At 17:51 12/01/04, you wrote: > >Hello, > > > >I am trying to set up Xitami 2.5c1 on windows XP. I have read through the > >documentation, and in theory understand that I need to make modifications > >to the xitami.aut file to log into the admin pages... but nothing I've > >tried is working. > > > >Perhaps I don't have the syntax right? > > > >Thanks! > >Jerry > > > --::Mailserver Verfaillie Bauwens::-- contact [postmaster@verfaillie.com] > Alle mails gecontroleerd op virussen. Virusdefinities dagelijks aangepast. > http://www.verfaillie.com > > -- > Xitami Users Mailing List -- For Xitami support > To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami > From xitami@lists.xitami.org Wed Jan 14 16:04:08 2004 From: xitami@lists.xitami.org (Ron Ackerman) Date: Wed, 14 Jan 2004 11:04:08 -0500 Subject: [Xitami] ssl vs non ssl In-Reply-To: Message-ID: I know this has been addressed before but I couldn't find it so forgive me if I'm rehashing old stuff. I want to run some secured sites and some not secured sites. Can that be done on Xitami Pro or do I need both version? Also how hard is it to upgrade to pro? Thanks guys, Ron From xitami@lists.xitami.org Thu Jan 15 03:58:21 2004 From: xitami@lists.xitami.org (Les Nagy) Date: Wed, 14 Jan 2004 22:58:21 -0500 Subject: [Xitami] FTP ulpoads cause crashes Message-ID: <40060FDD.30202@atsi.ca> Hello: I have been a user of Xitami for over a year. I have been very grateful to have usch a powerful and reliable piece of software to use. Thank you to the author(s). I seem to have a problem with 2.4 crashing when a client tries to send what would seem to be a normal amount of files to the server. I have been running 2.4d9 and then tried to upgrade to 2.4d10 by copying the exes to the appropriate places, I think. Anyway, this problem persists and I am facing the prospect of disabling the ftp server part and installing another ftp only server to fix this problem. Is there any solution I have missed possibly from reading what I can find? Thx in advance for any assistance. From xitami@lists.xitami.org Thu Jan 15 03:57:23 2004 From: xitami@lists.xitami.org (Les Nagy) Date: Wed, 14 Jan 2004 22:57:23 -0500 Subject: [Xitami] Crashing on FTP connections Message-ID: <40060FA3.3030108@mountaincable.net> Hello: I have been a user of Xitami for over a year. I have been very grateful to have usch a powerful and reliable piece of software to use. Thank you to the author(s). I seem to have a problem with 2.4 crashing when a client tries to send what would seem to be a normal amount of files to the server. I have been running 2.4d9 and then tried to upgrade to 2.4d10 by copying the exes to the appropriate places, I think. Anyway, this problem persists and I am facing the prospect of disabling the ftp server part and installing another ftp only server to fix this problem. Is there any solution I have missed possibly from reading what I can find? Thx in advance for any assistance. From xitami@lists.xitami.org Thu Jan 15 15:43:06 2004 From: xitami@lists.xitami.org (Day Tooley) Date: Thu, 15 Jan 2004 07:43:06 -0800 Subject: [Xitami] Crashing on FTP connections References: <40060FA3.3030108@mountaincable.net> Message-ID: <002b01c3db7e$456699a0$56d1a2d1@esactive.easystreet.com> I had a similar problem and the feedback I remember from Xitami was that the FTP service was not intended for robust service. It was suggested that another FTP server be used. What I ended up with was War FTP. It runs as an application or as a service. Never have had a hiccup in two years. You can get it at http://www.warftp.org/. If you want to review others, a good source is http://www.serverwatch.com/stypes/index.php/RlRQ. ~~~~~~~~~~~~~~~~~~~~~~~~~~~ Day Tooley Webfoot@EasyStreet.com When the game is over, both the king and the pawn are put into the same box. ----- Original Message ----- From: "Les Nagy" To: Sent: Wednesday, January 14, 2004 7:57 PM Subject: [Xitami] Crashing on FTP connections > Hello: > > I have been a user of Xitami for over a year. I have been very grateful > to have usch a powerful and reliable piece of software to use. Thank you > to the author(s). > > I seem to have a problem with 2.4 crashing when a client tries to send > what would seem to be a normal amount of files to the server. I have > been running 2.4d9 and then tried to upgrade to 2.4d10 by copying the > exes to the appropriate places, I think. > > Anyway, this problem persists and I am facing the prospect of disabling > the ftp server part and installing another ftp only server to fix this > problem. Is there any solution I have missed possibly from reading what > I can find? > > Thx in advance for any assistance. > > > -- > Xitami Users Mailing List -- For Xitami support > To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami > From xitami@lists.xitami.org Thu Jan 15 19:36:13 2004 From: xitami@lists.xitami.org (Les Nagy) Date: Thu, 15 Jan 2004 14:36:13 -0500 Subject: [Xitami] Crashing on FTP connections In-Reply-To: <002b01c3db7e$456699a0$56d1a2d1@esactive.easystreet.com> References: <40060FA3.3030108@mountaincable.net> <002b01c3db7e$456699a0$56d1a2d1@esactive.easystreet.com> Message-ID: <4006EBAD.4040404@atsi.ca> Day Tooley wrote: > I had a similar problem and the feedback I remember from Xitami was that the > FTP service was not intended for robust service. It was suggested that > another FTP server be used. > > What I ended up with was War FTP. It runs as an application or as a > service. Never have had a hiccup in two years. You can get it at > http://www.warftp.org/. > > If you want to review others, a good source is > http://www.serverwatch.com/stypes/index.php/RlRQ. Thx for the help. I will install another FTP server I run on another colo. From xitami@lists.xitami.org Fri Jan 16 22:23:39 2004 From: xitami@lists.xitami.org (Jonathan Drew) Date: Fri, 16 Jan 2004 16:23:39 -0600 Subject: [Xitami] virtual host configuration Message-ID: Can I host more than one website (different websites) with one IP address? I have done your instructions for "virtual host configuration" but my 2 domains point to the same website, is there a way to have them point to there own websites and not the same site? From xitami@lists.xitami.org Sat Jan 17 07:42:26 2004 From: xitami@lists.xitami.org (Marc Doigny) Date: Sat, 17 Jan 2004 08:42:26 +0100 Subject: [Xitami] virtual host configuration In-Reply-To: Message-ID: <5.1.0.14.2.20040117083448.023a5ec0@verfaillie4.verfaillie.local> At 23:23 16/01/04, you wrote: >Can I host more than one website (different websites) with one IP address? > In your defaults.cfg file (example) [Virtual-hosts] Mail.verfaillie.com=mail.cfg Shop.verfaillie.be=shop.cfg Shop.verfaillie.com=shop.cfg Web.verfaillie.be=verfa.cfg That's your mail.cfg (complete, example) [Server] webpages=webpages/mail [Accesslog] Filename=mail.log When somebody go to mail.verfaillie.com, the mail.cfg is checked, points to the "mail" directory. Verify that you have correct DNS pointing to your server for all domains. --::Mailserver Verfaillie Bauwens::-- contact [postmaster@verfaillie.com] Alle mails gecontroleerd op virussen. Virusdefinities dagelijks aangepast. http://www.verfaillie.com From xitami@lists.xitami.org Sun Jan 18 02:15:35 2004 From: xitami@lists.xitami.org (Jonathan Drew) Date: Sat, 17 Jan 2004 20:15:35 -0600 Subject: [Xitami] virtual host configuration References: <5.1.0.14.2.20040117083448.023a5ec0@verfaillie4.verfaillie.local> Message-ID: I have my default.cfg set to [Virtual-hosts] www.chicagoelegance.com=chicagoelegance.cfg and my chicagoelegance.cfg set to [Accesslog] Filename=chicagoelegance.log [Server] Webpages=webpages/chicagoelegance and it is not working, i still get the same website on both domains, any ideas??? ----- Original Message ----- From: "Marc Doigny" To: Sent: Saturday, January 17, 2004 1:42 AM Subject: Re: [Xitami] virtual host configuration At 23:23 16/01/04, you wrote: >Can I host more than one website (different websites) with one IP address? > In your defaults.cfg file (example) [Virtual-hosts] Mail.verfaillie.com=mail.cfg Shop.verfaillie.be=shop.cfg Shop.verfaillie.com=shop.cfg Web.verfaillie.be=verfa.cfg That's your mail.cfg (complete, example) [Server] webpages=webpages/mail [Accesslog] Filename=mail.log When somebody go to mail.verfaillie.com, the mail.cfg is checked, points to the "mail" directory. Verify that you have correct DNS pointing to your server for all domains. --::Mailserver Verfaillie Bauwens::-- contact [postmaster@verfaillie.com] Alle mails gecontroleerd op virussen. Virusdefinities dagelijks aangepast. http://www.verfaillie.com -- Xitami Users Mailing List -- For Xitami support To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami From xitami@lists.xitami.org Fri Jan 16 22:14:52 2004 From: xitami@lists.xitami.org (Jonathan Drew) Date: Fri, 16 Jan 2004 16:14:52 -0600 Subject: [Xitami] virtual host configuration Message-ID: <006b01c3dc7e$2a9195c0$4b48a743@D971GN11> This is a multi-part message in MIME format. ------=_NextPart_000_0068_01C3DC4B.DF97C7B0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Can I host more than one website (different websites) with one IP = address? I have done your instructions for "virtual host configuration" but my 2 = domains point to the same website, is there a way to have them point to = there own websites and not the same site? ------=_NextPart_000_0068_01C3DC4B.DF97C7B0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Can I host more than one website = (different=20 websites) with one IP address?
 
I have done your instructions for = "virtual host=20 configuration" but my 2 domains point to the same  website, is = there a=20 way to have them point to there own websites and not the same=20 site?
------=_NextPart_000_0068_01C3DC4B.DF97C7B0-- From xitami@lists.xitami.org Sun Jan 18 03:33:00 2004 From: xitami@lists.xitami.org (Marc Doigny) Date: Sun, 18 Jan 2004 04:33:00 +0100 Subject: [Xitami] virtual host configuration In-Reply-To: References: <5.1.0.14.2.20040117083448.023a5ec0@verfaillie4.verfaillie.local> Message-ID: <6.0.0.14.0.20040118042931.0279edb0@mail.verfaillie.com> At 03:15 18/01/04, you wrote: >I have my default.cfg set to Are you sure it's "default.cfg" and not "defaults.cfg"? What shows up in your logfile? Is something written in it? (then the correct config file is read in but the webpages directory is not accessed) Is nothing written in it then the config file chicagoelegance was never read. Don't forget to restart the webserver after modifications so the config files are read in again. Marc From xitami@lists.xitami.org Sun Jan 18 10:11:47 2004 From: xitami@lists.xitami.org (Martin Bleisteiner) Date: Sun, 18 Jan 2004 11:11:47 +0100 Subject: [Xitami] virtual host configuration References: <5.1.0.14.2.20040117083448.023a5ec0@verfaillie4.verfaillie.local> Message-ID: <002401c3ddab$7bc41520$3c01a8c0@mb60> Hello, ----- Original Message ----- From: "Jonathan Drew" > [Virtual-hosts] > www.chicagoelegance.com=chicagoelegance.cfg First: try short (8.3) filenames Then: look if anywhere is assigned something by ip adresses, like ip-adr=any.cfg or *=any.cfg > [Server] > Webpages=webpages/chicagoelegance Here put full path instead, e.g. c:\files\web\chicago\ (where your htm actually are) Also try short 8.3 directory and file names Martin From xitami@lists.xitami.org Mon Jan 19 22:45:19 2004 From: xitami@lists.xitami.org (Jonathan Drew) Date: Mon, 19 Jan 2004 16:45:19 -0600 Subject: [Xitami] virtual host configuration References: <5.1.0.14.2.20040117083448.023a5ec0@verfaillie4.verfaillie.local> <6.0.0.14.0.20040118042931.0279edb0@mail.verfaillie.com> Message-ID: my config file is "defaults.cfg" not "default" as I mistyped before and there is nothing in my log file and I restarted the web server after every change, I am at a lost??? ----- Original Message ----- From: "Marc Doigny" To: Sent: Saturday, January 17, 2004 9:33 PM Subject: Re: [Xitami] virtual host configuration At 03:15 18/01/04, you wrote: >I have my default.cfg set to Are you sure it's "default.cfg" and not "defaults.cfg"? What shows up in your logfile? Is something written in it? (then the correct config file is read in but the webpages directory is not accessed) Is nothing written in it then the config file chicagoelegance was never read. Don't forget to restart the webserver after modifications so the config files are read in again. Marc -- Xitami Users Mailing List -- For Xitami support To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami From xitami@lists.xitami.org Tue Jan 20 06:59:11 2004 From: xitami@lists.xitami.org (Martin Bleisteiner) Date: Tue, 20 Jan 2004 07:59:11 +0100 Subject: [Xitami] virtual host configuration References: <5.1.0.14.2.20040117083448.023a5ec0@verfaillie4.verfaillie.local> <6.0.0.14.0.20040118042931.0279edb0@mail.verfaillie.com> Message-ID: <001101c3df22$e8fa8480$3c01a8c0@mb60> Which version of Xitami do you use? ----- Original Message ----- From: "Jonathan Drew" To: Sent: Monday, January 19, 2004 11:45 PM Subject: Re: [Xitami] virtual host configuration > my config file is "defaults.cfg" not "default" as I mistyped before and > there is nothing in my log file and I restarted the web server after every > change, I am at a lost??? > From xitami@lists.xitami.org Tue Jan 20 07:52:46 2004 From: xitami@lists.xitami.org (Charles Schmidling) Date: Mon, 19 Jan 2004 23:52:46 -0800 Subject: [Xitami] virtual host configuration References: <5.1.0.14.2.20040117083448.023a5ec0@verfaillie4.verfaillie.local> <6.0.0.14.0.20040118042931.0279edb0@mail.verfaillie.com> Message-ID: <002001c3df2a$64a8a420$6401a80a@comcast.net> I finally got bold enough to set up my virtual hosting and it actually works. It would be easier to at least set things up with the Web Based Administration screens and come in later to the different .cfg files and tweak them if needed. To get to the WBA screens, there is a web page shortcut in your xitami directory called "redirect" that refers to the at http://127.0.0.1/admin (if not, that's where you go). Hopefully you set up your admin accts accordingly. The "VHost Wizard" option helps set up the cfg files for each domain. Tell it where you want stuff placed and it will set it up for you. The 8 character filename rule would be safe (.cfg is automatic). Now, go into "Virtual Hosts" Configuration. It lists all your VH configs set up previously. Hit the "Defaults..." button to access the default configurations. On the right are server options. Choose "vhost." This is where you equate domain names to config files. You can point multiple domain names at the same config file. examples: www.thisdomain.com thisdom.cfg thisdomain.com thisdom.cfg www.thisdomain.net thisdom.cfg thatdomain.org thatdom.cfg media.anotherone.com media.cfg Each type of domain reference has to be defined. Found that out the hard way. Oh, this sets up the "defaults.cfg" entries for vhosting. If you don't enter the "Default configuration screen first, I'm not sure where it goes. Also, the vhost screen in only so long. You can add more or change entries in the defaults.cfg file directly. A cute bonus is that the wizard way sorts the names for you. Woo-hoo. Basehost.cfg can be set up similarly. A little advice: sketch out your directory structure before you start; it will help continuity. I moved my "webpages" out of the Xitami folder and reorganized in c:\public. It has helped to locate stuff quicker. The only question left is what to do with all the new log files. All you need now is your DNS to point your domains to your IP. A Dynamic DNS would be useful and quicker to propagate changes. And redirection to non-standard ports works really well too and eliminates scanners and buffer overloaders. Robots still come in, though. Much Luck, Charles ----- Original Message ----- From: "Jonathan Drew" To: Sent: Monday, January 19, 2004 2:45 PM Subject: Re: [Xitami] virtual host configuration > my config file is "defaults.cfg" not "default" as I mistyped before and > there is nothing in my log file and I restarted the web server after every > change, I am at a lost??? > > ----- Original Message ----- > From: "Marc Doigny" > To: > Sent: Saturday, January 17, 2004 9:33 PM > Subject: Re: [Xitami] virtual host configuration > > > At 03:15 18/01/04, you wrote: > >I have my default.cfg set to > > > Are you sure it's "default.cfg" and not "defaults.cfg"? > What shows up in your logfile? > Is something written in it? (then the correct config file is read in but > the webpages directory is not accessed) > Is nothing written in it then the config file chicagoelegance was never > read. > > Don't forget to restart the webserver after modifications so the config > files are read in again. > > Marc > > > > > -- > Xitami Users Mailing List -- For Xitami support > To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami > > -- > Xitami Users Mailing List -- For Xitami support > To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami From xitami@lists.xitami.org Wed Jan 21 08:35:41 2004 From: xitami@lists.xitami.org (Jonathan Drew) Date: Wed, 21 Jan 2004 02:35:41 -0600 Subject: [Xitami] virtual host configuration References: <5.1.0.14.2.20040117083448.023a5ec0@verfaillie4.verfaillie.local> <6.0.0.14.0.20040118042931.0279edb0@mail.verfaillie.com> <002001c3df2a$64a8a420$6401a80a@comcast.net> Message-ID: Thanks to everyone the last instructions from Charles and Martin worked, thanks again for all the help. Jonathan ----- Original Message ----- From: "Charles Schmidling" To: Sent: Tuesday, January 20, 2004 1:52 AM Subject: Re: [Xitami] virtual host configuration I finally got bold enough to set up my virtual hosting and it actually works. It would be easier to at least set things up with the Web Based Administration screens and come in later to the different .cfg files and tweak them if needed. To get to the WBA screens, there is a web page shortcut in your xitami directory called "redirect" that refers to the at http://127.0.0.1/admin (if not, that's where you go). Hopefully you set up your admin accts accordingly. The "VHost Wizard" option helps set up the cfg files for each domain. Tell it where you want stuff placed and it will set it up for you. The 8 character filename rule would be safe (.cfg is automatic). Now, go into "Virtual Hosts" Configuration. It lists all your VH configs set up previously. Hit the "Defaults..." button to access the default configurations. On the right are server options. Choose "vhost." This is where you equate domain names to config files. You can point multiple domain names at the same config file. examples: www.thisdomain.com thisdom.cfg thisdomain.com thisdom.cfg www.thisdomain.net thisdom.cfg thatdomain.org thatdom.cfg media.anotherone.com media.cfg Each type of domain reference has to be defined. Found that out the hard way. Oh, this sets up the "defaults.cfg" entries for vhosting. If you don't enter the "Default configuration screen first, I'm not sure where it goes. Also, the vhost screen in only so long. You can add more or change entries in the defaults.cfg file directly. A cute bonus is that the wizard way sorts the names for you. Woo-hoo. Basehost.cfg can be set up similarly. A little advice: sketch out your directory structure before you start; it will help continuity. I moved my "webpages" out of the Xitami folder and reorganized in c:\public. It has helped to locate stuff quicker. The only question left is what to do with all the new log files. All you need now is your DNS to point your domains to your IP. A Dynamic DNS would be useful and quicker to propagate changes. And redirection to non-standard ports works really well too and eliminates scanners and buffer overloaders. Robots still come in, though. Much Luck, Charles ----- Original Message ----- From: "Jonathan Drew" To: Sent: Monday, January 19, 2004 2:45 PM Subject: Re: [Xitami] virtual host configuration > my config file is "defaults.cfg" not "default" as I mistyped before and > there is nothing in my log file and I restarted the web server after every > change, I am at a lost??? > > ----- Original Message ----- > From: "Marc Doigny" > To: > Sent: Saturday, January 17, 2004 9:33 PM > Subject: Re: [Xitami] virtual host configuration > > > At 03:15 18/01/04, you wrote: > >I have my default.cfg set to > > > Are you sure it's "default.cfg" and not "defaults.cfg"? > What shows up in your logfile? > Is something written in it? (then the correct config file is read in but > the webpages directory is not accessed) > Is nothing written in it then the config file chicagoelegance was never > read. > > Don't forget to restart the webserver after modifications so the config > files are read in again. > > Marc > > > > > -- > Xitami Users Mailing List -- For Xitami support > To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami > > -- > Xitami Users Mailing List -- For Xitami support > To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami -- Xitami Users Mailing List -- For Xitami support To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami From xitami@lists.xitami.org Wed Jan 21 16:14:05 2004 From: xitami@lists.xitami.org (tom buckley) Date: Wed, 21 Jan 2004 11:14:05 -0500 Subject: [Xitami] Access extra hard drive? Message-ID: Hello all, Is it possible to access an extra hard drive through your website? Like having part of your site on the normal C drve, and part of it on D? If so, how to do this? I've tried several was of setting up the actual 'link' and although there's no prob. for me to access D:\ via the link, from any page on my site, However, other visitors can not use ANY of the links I've come up with so far, to access the extra h/d... Thanks for any help or suggestions! jgq _________________________________________________________________ Check out the coupons and bargains on MSN Offers! http://shopping.msn.com/softcontent/softcontent.aspx?scmId=1418 From xitami@lists.xitami.org Wed Jan 21 16:27:54 2004 From: xitami@lists.xitami.org (M. Jason Smiley) Date: Wed, 21 Jan 2004 11:27:54 -0500 Subject: [Xitami] Access extra hard drive? References: Message-ID: <0cbf01c3e03b$85fc1b90$2f28a8c0@rcolmstead.com> i do it all the time. slapped in a 120gb second drive for storage. defaults.cfg under the alias section [Alias] /cam=d:/xitami/webpages/cam ----- Original Message ----- From: "tom buckley" To: Sent: Wednesday, January 21, 2004 11:14 AM Subject: [Xitami] Access extra hard drive? > > Hello all, > > Is it possible to access an extra hard drive through your website? Like > having part of your site on the normal C drve, and part of it on D? If so, > how to do this? I've tried several was of setting up the actual 'link' > and although there's no prob. for me to access D:\ via the link, from any > page on my site, However, other visitors can not use ANY of the links I've > come up with so far, to access the extra h/d... Thanks for any help or > suggestions! > > jgq > > _________________________________________________________________ > Check out the coupons and bargains on MSN Offers! > http://shopping.msn.com/softcontent/softcontent.aspx?scmId=1418 > > > -- > Xitami Users Mailing List -- For Xitami support > To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami > From xitami@lists.xitami.org Wed Jan 21 20:17:23 2004 From: xitami@lists.xitami.org (Ron Ackerman) Date: Wed, 21 Jan 2004 15:17:23 -0500 Subject: [Xitami] Xitami Bug Report In-Reply-To: <0cbf01c3e03b$85fc1b90$2f28a8c0@rcolmstead.com> Message-ID: I received this today in a popup bug message. Is this a known bug? 21/Jan/2004:15:14:25 -0500 Xitami/2.5c1 Abort at smttime:Generate-Response-Events:set alarm request (Expect-Event, Alarm-Event) From xitami@lists.xitami.org Fri Jan 23 02:23:48 2004 From: xitami@lists.xitami.org (tom buckley) Date: Thu, 22 Jan 2004 21:23:48 -0500 Subject: [Xitami] Access extra hard drive? Message-ID: Thanks for the help! However, I did try this. I started by first trying to make that entry into my defaults, and THEN, I even went into the web-based setup and entered this info into the alias section there!! I just pointed it to: D:\Xitami2 (just like that), hoping to point to the second occurrence of Xitami that I have installed on my D:\ drive.... It still does not work.. A remote user who tries to access this, says that the link to this section is not even clickable! Any other help or advice, or maybe showing me what I'm doing wrong, or exactly how to go about this, would be greatly appreciated! Thanks again, and have a good day! Please help with this, as my C:\ drive is FULL! jgq ++++++++ i do it all the time. slapped in a 120gb second drive for storage. defaults.cfg under the alias section [Alias] /cam=d:/xitami/webpages/cam ----- Original Message ----- From: "tom buckley" To: Sent: Wednesday, January 21, 2004 11:14 AM Subject: [Xitami] Access extra hard drive? > > Hello all, > > Is it possible to access an extra hard drive through your website? Like >having part of your site on the normal C drve, and part of it on D? If so, > how to do this? I've tried several was of setting up the actual 'link' >and although there's no prob. for me to access D:\ via the link, from any >page on my site, However, other visitors can not use ANY of the links I've >come up with so far, to access the extra h/d... Thanks for any help or >suggestions! > > jgq > _________________________________________________________________ High-speed users—be more efficient online with the new MSN Premium Internet Software. http://join.msn.com/?pgmarket=en-us&page=byoa/prem&ST=1 From xitami@lists.xitami.org Fri Jan 23 07:27:39 2004 From: xitami@lists.xitami.org (Martin Bleisteiner) Date: Fri, 23 Jan 2004 08:27:39 +0100 Subject: [Xitami] Access extra hard drive? References: Message-ID: <000401c3e182$61cf00a0$3c01a8c0@mb60> Hello, at "Configuration" - "Aliases" page in the web based admin should be an entry like: Alias: Points to path: test d:\xitami2\ Inside d:\xitami2 directory should be an index.htm. Then, if somebody types at his browser: http://www.domain.com/test/ then should appear index.htm from d:\xitami2. Also you can test it at the "Configuration" screen inside Web based Admin: at the bottom there's an input box called "Test URI Mapping". (Not with all versions of Xitami.) There you can type the http://www.domain.com/test and you see to which file or dir it does point, Martin From xitami@lists.xitami.org Fri Jan 23 12:24:11 2004 From: xitami@lists.xitami.org (Go Bonkers) Date: Fri, 23 Jan 2004 07:24:11 -0500 Subject: [Xitami] Access extra hard drive? Message-ID: [Alias] 6309 = "H:/Anon-FTP/Xitami/webpages/watch/6309-729/" Ddlink = "D:/d-link/" can change it in defaults.cfg or wba 'configuration' 'alias' writes it to this file just fooling here.... and it would not work without the last slash above works, is copy and paste. _________________________________________________________________ Check out the new MSN 9 Dial-up — fast & reliable Internet access with prime features! http://join.msn.com/?pgmarket=en-us&page=dialup/home&ST=1 From xitami@lists.xitami.org Fri Jan 23 15:15:02 2004 From: xitami@lists.xitami.org (M. Jason Smiley) Date: Fri, 23 Jan 2004 10:15:02 -0500 Subject: [Xitami] Access extra hard drive? References: Message-ID: <0dc901c3e1c3$acf4e9f0$2f28a8c0@rcolmstead.com> look very carefully at the syntax.... "/" are used - NOT "\" ----- Original Message ----- From: "tom buckley" To: Sent: Thursday, January 22, 2004 9:23 PM Subject: RE: [Xitami] Access extra hard drive? > > Thanks for the help! However, I did try this. I started by first trying > to make that entry into my defaults, and THEN, I even went into the > web-based setup and entered this info into the alias section there!! I just > pointed it to: D:\Xitami2 (just like that), hoping to point to the > second occurrence of Xitami that I have installed on my D:\ drive.... It > still does not work.. A remote user who tries to access this, says that the > link to this section is not even clickable! Any other help or advice, or > maybe showing me what I'm doing wrong, or exactly how to go about this, > would be greatly appreciated! Thanks again, and have a good day! Please > help with this, as my C:\ drive is FULL! > > jgq > ++++++++ > > > > i do it all the time. slapped in a 120gb second drive for storage. > > defaults.cfg under the alias section > > [Alias] > /cam=d:/xitami/webpages/cam > > > ----- Original Message ----- > From: "tom buckley" > To: > Sent: Wednesday, January 21, 2004 11:14 AM > Subject: [Xitami] Access extra hard drive? > > > > > > Hello all, > > > > Is it possible to access an extra hard drive through your website? Like > >having part of your site on the normal C drve, and part of it on D? If > so, > > how to do this? I've tried several was of setting up the actual 'link' > >and although there's no prob. for me to access D:\ via the link, from any > >page on my site, However, other visitors can not use ANY of the links > I've > >come up with so far, to access the extra h/d... Thanks for any help or > >suggestions! > > > > jgq > > > > _________________________________________________________________ > High-speed users-be more efficient online with the new MSN Premium Internet > Software. http://join.msn.com/?pgmarket=en-us&page=byoa/prem&ST=1 > > > -- > Xitami Users Mailing List -- For Xitami support > To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami > From xitami@lists.xitami.org Fri Jan 23 15:58:08 2004 From: xitami@lists.xitami.org (Chestnut) Date: Fri, 23 Jan 2004 07:58:08 -0800 Subject: [Xitami] Access extra hard drive? References: Message-ID: <003c01c3e1c9$b23994a0$31c6ff40@2c01v01> Tom, your wording in this post seems to indicate that you have installed Xitami on the d drive also. ???Two installs of the server??? If so, the guys have been trying to point out how the server installed on the c drive can use the d drives space not using another installation. If I'm wrong on this sorry ahead of time, if not you have two installs fighting each other. Patrick ----- Original Message ----- From: "tom buckley" To: Sent: Thursday, January 22, 2004 6:23 PM Subject: RE: [Xitami] Access extra hard drive? > > Thanks for the help! However, I did try this. I started by first trying > to make that entry into my defaults, and THEN, I even went into the > web-based setup and entered this info into the alias section there!! I just > pointed it to: D:\Xitami2 (just like that), hoping to point to the > second occurrence of Xitami that I have installed on my D:\ drive.... It > still does not work.. A remote user who tries to access this, says that the > link to this section is not even clickable! Any other help or advice, or > maybe showing me what I'm doing wrong, or exactly how to go about this, > would be greatly appreciated! Thanks again, and have a good day! Please > help with this, as my C:\ drive is FULL! > > jgq > ++++++++ > > > > i do it all the time. slapped in a 120gb second drive for storage. > > defaults.cfg under the alias section > > [Alias] > /cam=d:/xitami/webpages/cam > > > ----- Original Message ----- > From: "tom buckley" > To: > Sent: Wednesday, January 21, 2004 11:14 AM > Subject: [Xitami] Access extra hard drive? > > > > > > Hello all, > > > > Is it possible to access an extra hard drive through your website? Like > >having part of your site on the normal C drve, and part of it on D? If > so, > > how to do this? I've tried several was of setting up the actual 'link' > >and although there's no prob. for me to access D:\ via the link, from any > >page on my site, However, other visitors can not use ANY of the links > I've > >come up with so far, to access the extra h/d... Thanks for any help or > >suggestions! > > > > jgq > > > > _________________________________________________________________ > High-speed users-be more efficient online with the new MSN Premium Internet > Software. http://join.msn.com/?pgmarket=en-us&page=byoa/prem&ST=1 > > > -- > Xitami Users Mailing List -- For Xitami support > To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami From xitami@lists.xitami.org Mon Jan 26 03:41:10 2004 From: xitami@lists.xitami.org (Ewen McNeill) Date: Mon, 26 Jan 2004 16:41:10 +1300 Subject: [Xitami] administrivia: list mail now spam scanned Message-ID: <20040126034110.577483C4876C@basilica.la.naos.co.nz> Hi Folks, A quick administrive note: mail to the Xitami mailing list is now passed through a spam scanner, and spam messages (scoring > 5 in SpamAssassin) are silently discarded. This is primarily to eliminate the spam messages which arrive every day in the "message from non-list-member" file approval. I don't think this should interfere at all with normal messages to the mailing list, but if anyone does encounter any problems then please let me know directly (ewen@imatix.com). Ewen -- Ewen McNeill, System Administrator, iMatix Corporation www.imatix.com From xitami@lists.xitami.org Wed Jan 28 08:43:44 2004 From: xitami@lists.xitami.org (Steven L. Haas) Date: Wed, 28 Jan 2004 02:43:44 -0600 Subject: [Xitami] web server w/ router (again) Message-ID: This is a multi-part message in MIME format. ------=_NextPart_000_001B_01C3E548.8C006CF0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Ive posted a couple of times now about trying to run the xitami web = server from my computer. It's set up pn a broadband connection that is = shared with a Linksys router between two computers. I set this computer = (Windows XP) to have a manual IP of 192.168.1.2 (the router's IP is = 192.168.1.1) with the subnet mask being set to 255.255.255.0, the = default gateway as 192.168.1.1. When I ran ipconfig/all I got 3 DNS = numbers and put the first two in as my primary and alternate DNS = servers. I then set the router up in the advanced/DMZ HOST IP ADDRESS = to be 192.168.1.2 and turned the Xitami web server on. When I enter = http://192.168.1.1 into the browser it goes to the router set-up, which = is good. When I try to access pages on the internet, it works, which is = good. When I enter http://192.168.1.2 it loads the index.html page I = put in the Xitami server folder, which is great. Here's the problem, = however... when I look up my IP address online (the one assigned to me = via my ISP) I get 24.209.120.13. When I enter http://24.209.120.13 into = my browser, I get nothing, which is bad. It seems that I have = everything set up right and straightened out, but I still cant get = access to the web site Im trying to host from this computer. What am I = doing wrong, or what else can I do? ------=_NextPart_000_001B_01C3E548.8C006CF0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Ive posted a couple of times now about = trying to=20 run the xitami web server from my computer.  It's set up pn a = broadband=20 connection that is shared with a Linksys router between two = computers.  I=20 set this computer (Windows XP)  to have a manual IP of = 192.168.1.2 =20 (the router's IP is 192.168.1.1) with the subnet mask being set to=20 255.255.255.0, the default gateway as 192.168.1.1.  When I ran = ipconfig/all=20 I got 3 DNS numbers and put the first two in as my primary and alternate = DNS=20 servers.  I then set the router up in the advanced/DMZ HOST IP = ADDRESS to=20 be 192.168.1.2 and turned the Xitami web server on.  When I enter = http://192.168.1.1 into the browser it = goes to the=20 router set-up, which is good.  When I try to access pages on the = internet,=20 it works, which is good.  When I enter http://192.168.1.2 it loads the = index.html page I=20 put in the Xitami server folder, which is great.  Here's the = problem,=20 however... when I look up my IP address online (the one assigned to me = via my=20 ISP) I get 24.209.120.13.  When I enter http://24.209.120.13 into my = browser, I get=20 nothing, which is bad.  It seems that I have everything set up = right and=20 straightened out, but I still cant get access to the web site Im trying = to host=20 from this computer.  What am I doing wrong, or what else can I = do? =20
------=_NextPart_000_001B_01C3E548.8C006CF0-- From xitami@lists.xitami.org Wed Jan 28 14:49:35 2004 From: xitami@lists.xitami.org (M. Jason Smiley) Date: Wed, 28 Jan 2004 09:49:35 -0500 Subject: [Xitami] web server w/ router (again) References: Message-ID: <11d501c3e5ad$f704dda0$2f28a8c0@rcolmstead.com> from the outside (internet), people are going to 24.209.120.13 which is your router. you need to allow them through the router to your pc that has the web server. i always use NAT for this. do a search and you'll find tons of info. if your router supports nat it will be in the help documentation for your router. basically you have to translate port 80 (www) from your outside address (24.209.120.13) to your inside address (192.168.1.2). ----- Original Message ----- From: "Steven L. Haas" To: Sent: Wednesday, January 28, 2004 3:43 AM Subject: [Xitami] web server w/ router (again) Ive posted a couple of times now about trying to run the xitami web server from my computer. It's set up pn a broadband connection that is shared with a Linksys router between two computers. I set this computer (Windows XP) to have a manual IP of 192.168.1.2 (the router's IP is 192.168.1.1) with the subnet mask being set to 255.255.255.0, the default gateway as 192.168.1.1. When I ran ipconfig/all I got 3 DNS numbers and put the first two in as my primary and alternate DNS servers. I then set the router up in the advanced/DMZ HOST IP ADDRESS to be 192.168.1.2 and turned the Xitami web server on. When I enter http://192.168.1.1 into the browser it goes to the router set-up, which is good. When I try to access pages on the internet, it works, which is good. When I enter http://192.168.1.2 it loads the index.html page I put in the Xitami server folder, which is great. Here's the problem, however... when I look up my IP address online (the one assigned to me via my ISP) I get 24.209.120.13. When I enter http://24.209.120.13 into my browser, I get nothing, which is bad. It seems that I have everything set up right and straightened out, but I still cant get access to the web site Im trying to host from this computer. What am I doing wrong, or what else can I do? From xitami@lists.xitami.org Wed Jan 28 17:37:08 2004 From: xitami@lists.xitami.org (Steven L. Haas) Date: Wed, 28 Jan 2004 11:37:08 -0600 Subject: [Xitami] web server w/ router (again) References: <11d501c3e5ad$f704dda0$2f28a8c0@rcolmstead.com> Message-ID: I did a search on the net and realized that all I needed to do was some port forwarding. Thanks for the help. ----- Original Message ----- From: "M. Jason Smiley" To: Sent: Wednesday, January 28, 2004 8:49 AM Subject: Re: [Xitami] web server w/ router (again) > from the outside (internet), people are going to 24.209.120.13 which is > your router. you need to allow them through the router to your pc that has > the web server. > > i always use NAT for this. do a search and you'll find tons of info. if your > router supports nat it will be in the help documentation for your router. > > basically you have to translate port 80 (www) from your outside address > (24.209.120.13) to your inside address (192.168.1.2). > > > > ----- Original Message ----- > From: "Steven L. Haas" > To: > Sent: Wednesday, January 28, 2004 3:43 AM > Subject: [Xitami] web server w/ router (again) > > > Ive posted a couple of times now about trying to run the xitami web server > from my computer. It's set up pn a broadband connection that is shared with > a Linksys router between two computers. I set this computer (Windows XP) > to have a manual IP of 192.168.1.2 (the router's IP is 192.168.1.1) with > the subnet mask being set to 255.255.255.0, the default gateway as > 192.168.1.1. When I ran ipconfig/all I got 3 DNS numbers and put the first > two in as my primary and alternate DNS servers. I then set the router up in > the advanced/DMZ HOST IP ADDRESS to be 192.168.1.2 and turned the Xitami web > server on. When I enter http://192.168.1.1 into the browser it goes to the > router set-up, which is good. When I try to access pages on the internet, > it works, which is good. When I enter http://192.168.1.2 it loads the > index.html page I put in the Xitami server folder, which is great. Here's > the problem, however... when I look up my IP address online (the one > assigned to me via my ISP) I get 24.209.120.13. When I enter > http://24.209.120.13 into my browser, I get nothing, which is bad. It seems > that I have everything set up right and straightened out, but I still cant > get access to the web site Im trying to host from this computer. What am I > doing wrong, or what else can I do? > > > -- > Xitami Users Mailing List -- For Xitami support > To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami > From xitami@lists.xitami.org Wed Jan 28 18:37:33 2004 From: xitami@lists.xitami.org (Charles Schmidling) Date: Wed, 28 Jan 2004 10:37:33 -0800 Subject: [Xitami] web server w/ router (again) References: Message-ID: <001901c3e5cd$cbaa5520$6401a80a@comcast.net> This is a multi-part message in MIME format. ------=_NextPart_000_0016_01C3E58A.BD086F40 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Steven, This should have worked. Port forwarding, of course, will work but the = problem is if you want to run other servers (FTP, Mail, streamed media) = on this computer, you will have to forward all associated ports = accordingly and is the solution if these services are on different = computers. DMZ is meant to forward everything to one machine. I think it's a = gaming thing. Since your site functions, oh well... Congrats, Charles ----- Original Message -----=20 From: Steven L. Haas=20 To: xitami@lists.xitami.org=20 Sent: Wednesday, January 28, 2004 12:43 AM Subject: [Xitami] web server w/ router (again) Ive posted a couple of times now about trying to run the xitami web = server from my computer. It's set up pn a broadband connection that is = shared with a Linksys router between two computers. I set this computer = (Windows XP) to have a manual IP of 192.168.1.2 (the router's IP is = 192.168.1.1) with the subnet mask being set to 255.255.255.0, the = default gateway as 192.168.1.1. When I ran ipconfig/all I got 3 DNS = numbers and put the first two in as my primary and alternate DNS = servers. I then set the router up in the advanced/DMZ HOST IP ADDRESS = to be 192.168.1.2 and turned the Xitami web server on. When I enter = http://192.168.1.1 into the browser it goes to the router set-up, which = is good. When I try to access pages on the internet, it works, which is = good. When I enter http://192.168.1.2 it loads the index.html page I = put in the Xitami server folder, which is great. Here's the problem, = however... when I look up my IP address online (the one assigned to me = via my ISP) I get 24.209.120.13. When I enter http://24.209.120.13 into = my browser, I get nothing, which is bad. It seems that I have = everything set up right and straightened out, but I still cant get = access to the web site Im trying to host from this computer. What am I = doing wrong, or what else can I do? ------=_NextPart_000_0016_01C3E58A.BD086F40 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Steven,
This should have worked.  Port forwarding, of = course,=20 will work but the problem is if you want to run other servers (FTP, = Mail,=20 streamed media) on this computer, you will have to forward all = associated ports=20 accordingly and is the solution if these services are on different=20 computers.
 
DMZ is meant to forward everything to one machine.  I think = it's a=20 gaming thing.
 
Since your site functions, oh well...
 
Congrats,
Charles
 
----- Original Message -----
From:=20 Steven L.=20 Haas
Sent: Wednesday, January 28, = 2004 12:43=20 AM
Subject: [Xitami] web server w/ = router=20 (again)

Ive posted a couple of times now = about trying to=20 run the xitami web server from my computer.  It's set up pn a = broadband=20 connection that is shared with a Linksys router between two = computers.  I=20 set this computer (Windows XP)  to have a manual IP of = 192.168.1.2 =20 (the router's IP is 192.168.1.1) with the subnet mask being set to=20 255.255.255.0, the default gateway as 192.168.1.1.  When I ran=20 ipconfig/all I got 3 DNS numbers and put the first two in as my = primary and=20 alternate DNS servers.  I then set the router up in the = advanced/DMZ HOST=20 IP ADDRESS to be 192.168.1.2 and turned the Xitami web server = on.  When I=20 enter http://192.168.1.1 into the = browser it=20 goes to the router set-up, which is good.  When I try to access = pages on=20 the internet, it works, which is good.  When I enter http://192.168.1.2 it loads the = index.html page=20 I put in the Xitami server folder, which is great.  Here's the = problem,=20 however... when I look up my IP address online (the one assigned to me = via my=20 ISP) I get 24.209.120.13.  When I enter http://24.209.120.13 into my = browser, I=20 get nothing, which is bad.  It seems that I have everything set = up right=20 and straightened out, but I still cant get access to the web site Im = trying to=20 host from this computer.  What am I doing wrong, or what else can = I=20 do? 
------=_NextPart_000_0016_01C3E58A.BD086F40-- From xitami@lists.xitami.org Wed Jan 28 19:27:07 2004 From: xitami@lists.xitami.org (Ron Ackerman) Date: Wed, 28 Jan 2004 14:27:07 -0500 Subject: [Xitami] web server w/ router (again) In-Reply-To: Message-ID: This is a multi-part message in MIME format. ------=_NextPart_000_0002_01C3E5AA.CEA337B0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit This is what I received when I entered your IP Welcome to "HAASWOOD", the USTechnologies, Inc. web-site server/host located in Waukesha, WI. You have reached the main index/administration page. Click on the corresponding link to access one of our hosted web-sites. USTechnologies, Inc. The ORIGINAL Darwin Awards Web-Site The Tori-Day Web-Site The Guy Dude Web-Site E-Mail USTechnologies, Inc. -----Original Message----- From: xitami-admin@lists.xitami.org [mailto:xitami-admin@lists.xitami.org]On Behalf Of Steven L. Haas Sent: Wednesday, January 28, 2004 3:44 AM To: xitami@lists.xitami.org Subject: [Xitami] web server w/ router (again) Ive posted a couple of times now about trying to run the xitami web server from my computer. It's set up pn a broadband connection that is shared with a Linksys router between two computers. I set this computer (Windows XP) to have a manual IP of 192.168.1.2 (the router's IP is 192.168.1.1) with the subnet mask being set to 255.255.255.0, the default gateway as 192.168.1.1. When I ran ipconfig/all I got 3 DNS numbers and put the first two in as my primary and alternate DNS servers. I then set the router up in the advanced/DMZ HOST IP ADDRESS to be 192.168.1.2 and turned the Xitami web server on. When I enter http://192.168.1.1 into the browser it goes to the router set-up, which is good. When I try to access pages on the internet, it works, which is good. When I enter http://192.168.1.2 it loads the index.html page I put in the Xitami server folder, which is great. Here's the problem, however... when I look up my IP address online (the one assigned to me via my ISP) I get 24.209.120.13. When I enter http://24.209.120.13 into my browser, I get nothing, which is bad. It seems that I have everything set up right and straightened out, but I still cant get access to the web site Im trying to host from this computer. What am I doing wrong, or what else can I do? ------=_NextPart_000_0002_01C3E5AA.CEA337B0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
This=20 is what I received when I entered your IP

Welcome to = "HAASWOOD", the=20 USTechnologies, = Inc.=20 web-site server/host located in Waukesha, WI. You have reached the main=20 index/administration page.   Click on the = corresponding link to=20 access one of our hosted web-sites.

 

USTechnologies, = Inc.    The ORIGINAL = Darwin Awards=20 Web-Site    The Tori-Day = Web-Site    The=20 Guy Dude Web-Site

 


E-Mail USTechnologies, Inc.=20

-----Original Message-----
From:=20 xitami-admin@lists.xitami.org = [mailto:xitami-admin@lists.xitami.org]On=20 Behalf Of Steven L. Haas
Sent: Wednesday, January 28, = 2004 3:44=20 AM
To: xitami@lists.xitami.org
Subject: [Xitami] = web=20 server w/ router (again)

Ive posted a couple of times now = about trying to=20 run the xitami web server from my computer.  It's set up pn a = broadband=20 connection that is shared with a Linksys router between two = computers.  I=20 set this computer (Windows XP)  to have a manual IP of = 192.168.1.2 =20 (the router's IP is 192.168.1.1) with the subnet mask being set to=20 255.255.255.0, the default gateway as 192.168.1.1.  When I ran=20 ipconfig/all I got 3 DNS numbers and put the first two in as my = primary and=20 alternate DNS servers.  I then set the router up in the = advanced/DMZ HOST=20 IP ADDRESS to be 192.168.1.2 and turned the Xitami web server = on.  When I=20 enter http://192.168.1.1 into the = browser it=20 goes to the router set-up, which is good.  When I try to access = pages on=20 the internet, it works, which is good.  When I enter http://192.168.1.2 it loads the = index.html page=20 I put in the Xitami server folder, which is great.  Here's the = problem,=20 however... when I look up my IP address online (the one assigned to me = via my=20 ISP) I get 24.209.120.13.  When I enter http://24.209.120.13 into my = browser, I=20 get nothing, which is bad.  It seems that I have everything set = up right=20 and straightened out, but I still cant get access to the web site Im = trying to=20 host from this computer.  What am I doing wrong, or what else can = I=20 do? 
------=_NextPart_000_0002_01C3E5AA.CEA337B0-- From xitami@lists.xitami.org Thu Jan 29 15:59:37 2004 From: xitami@lists.xitami.org (Chestnut) Date: Thu, 29 Jan 2004 07:59:37 -0800 Subject: [Xitami] web server w/ router (again) References: Message-ID: <002101c3e680$e5c7e130$27fab1d8@2c01v01> This is a multi-part message in MIME format. ------=_NextPart_000_001E_01C3E63D.D72A6820 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Steve, do you mean that you enter 24.209.120.13 when within your own = network, if so that will not work, need to be on the outside, another = computer accessing from somewhere other than your own place. The setup = appears to be fine. I accessed your site at 24... and it loads fine. = Even went to the link on The ORIGINAL DARWIN... and it loads, went to = one of the links from there, fine. It appears to me that your setup is = working as you want it to. I would say you are doing nothing wrong. Patrick ----- Original Message -----=20 From: Steven L. Haas=20 To: xitami@lists.xitami.org=20 Sent: Wednesday, January 28, 2004 12:43 AM Subject: [Xitami] web server w/ router (again) Ive posted a couple of times now about trying to run the xitami web = server from my computer. It's set up pn a broadband connection that is = shared with a Linksys router between two computers. I set this computer = (Windows XP) to have a manual IP of 192.168.1.2 (the router's IP is = 192.168.1.1) with the subnet mask being set to 255.255.255.0, the = default gateway as 192.168.1.1. When I ran ipconfig/all I got 3 DNS = numbers and put the first two in as my primary and alternate DNS = servers. I then set the router up in the advanced/DMZ HOST IP ADDRESS = to be 192.168.1.2 and turned the Xitami web server on. When I enter = http://192.168.1.1 into the browser it goes to the router set-up, which = is good. When I try to access pages on the internet, it works, which is = good. When I enter http://192.168.1.2 it loads the index.html page I = put in the Xitami server folder, which is great. Here's the problem, = however... when I look up my IP address online (the one assigned to me = via my ISP) I get 24.209.120.13. When I enter http://24.209.120.13 into = my browser, I get nothing, which is bad. It seems that I have = everything set up right and straightened out, but I still cant get = access to the web site Im trying to host from this computer. What am I = doing wrong, or what else can I do? ------=_NextPart_000_001E_01C3E63D.D72A6820 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Steve, do you mean that you enter = 24.209.120.13=20 when within your own network, if so that will not work, need to be on = the=20 outside, another computer accessing from somewhere other than your own = place.=20 The setup appears to be fine. I accessed your site at 24... and it loads = fine.=20 Even went to the link on The ORIGINAL DARWIN... and it loads, went to = one of the=20 links from there, fine. It appears to me that your setup is working as = you want=20 it to. I would say you are doing nothing wrong.
Patrick
----- Original Message -----
From:=20 Steven L.=20 Haas
Sent: Wednesday, January 28, = 2004 12:43=20 AM
Subject: [Xitami] web server w/ = router=20 (again)

Ive posted a couple of times now = about trying to=20 run the xitami web server from my computer.  It's set up pn a = broadband=20 connection that is shared with a Linksys router between two = computers.  I=20 set this computer (Windows XP)  to have a manual IP of = 192.168.1.2 =20 (the router's IP is 192.168.1.1) with the subnet mask being set to=20 255.255.255.0, the default gateway as 192.168.1.1.  When I ran=20 ipconfig/all I got 3 DNS numbers and put the first two in as my = primary and=20 alternate DNS servers.  I then set the router up in the = advanced/DMZ HOST=20 IP ADDRESS to be 192.168.1.2 and turned the Xitami web server = on.  When I=20 enter http://192.168.1.1 into the = browser it=20 goes to the router set-up, which is good.  When I try to access = pages on=20 the internet, it works, which is good.  When I enter http://192.168.1.2 it loads the = index.html page=20 I put in the Xitami server folder, which is great.  Here's the = problem,=20 however... when I look up my IP address online (the one assigned to me = via my=20 ISP) I get 24.209.120.13.  When I enter http://24.209.120.13 into my = browser, I=20 get nothing, which is bad.  It seems that I have everything set = up right=20 and straightened out, but I still cant get access to the web site Im = trying to=20 host from this computer.  What am I doing wrong, or what else can = I=20 do? 
------=_NextPart_000_001E_01C3E63D.D72A6820-- From xitami@lists.xitami.org Thu Jan 29 17:30:53 2004 From: xitami@lists.xitami.org (John Stuppi) Date: Thu, 29 Jan 2004 12:30:53 -0500 Subject: [Xitami] Setting FTP Data Port to 20 Message-ID: <009801c3e68d$a56fca50$d8a5560a@amer.cisco.com> Is there a way to prevent the Xitami FTP server from trying other ports for the FTP Data Port (default = 20) when using Active FTP? I need the server to only use TCP 20 for troubleshooting purposes. Thanks in advance. Thanks, John John Stuppi, CISSP CCIE #11154, Security Network Consulting Engineer Cisco Systems, Inc. 1325 Campus Parkway Wall Township, NJ 07753 Office: (732) 751-6184 Mobile: (732) 319-3886 Fax: (732) 751-6002 From xitami@lists.xitami.org Thu Jan 29 20:08:44 2004 From: xitami@lists.xitami.org (Charles Schmidling) Date: Thu, 29 Jan 2004 12:08:44 -0800 Subject: [Xitami] web server w/ router (again) References: <002101c3e680$e5c7e130$27fab1d8@2c01v01> Message-ID: <001301c3e6a3$b3f8f180$6401a80a@comcast.net> This is a multi-part message in MIME format. ------=_NextPart_000_0010_01C3E660.A44C0440 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Chestnut, Entering your external IP WILL access your web site, even when typed at = the server (just tested it). Your access.log file will show your = gateway address (in Steve's case 192.168.1.1) instead of the usual = external access IP. Sometimes, in my instance anyway, you have to enter = the "http://" along with the IP. But ... if virtual hosting is active = and there's nothing at base host, then you get nothing. I don't understand why it doesn't work the same as my operation. For = the sake of comparison: Router is a Linksys BEFW11S4 wireless 4-port (first version, nearly 2 = years old) Router's address is changed to 10.168.1.1 and is also the gateway Subnet mask is 255.255.248.0 (I don't know why) DHCP services are on with addresses starting at 10.168.1.100 DMZ Host is set to 10.168.1.50 (notice outside DHCP territory but = shouldn't matter) (*I have tried Port Forward and that works slick too!) Computer is a hand-me-down P166 that I just upped the mem to 256MB; = 3.25GB HD. Running a Xitami 2.5c1 console (xidos.exe) in a DOS windows on Windows = 98SE (does service work?) HTTP port is changed to 1975 and FTP is disabled Virtual Host is active (and actually working) but base host is blank. Server is manually configure to 10.168.1.50 Gateway is entered as 10.168.1.1 along with subnet mask 255.255.255.0 DNS IPs are also entered manually and can be found on the router's = Status page Other servers installed: Fictional Daemon (FTP and Telnet) and Mercury = Mail Also on board: MySQL and PHP I think that's all. Hope this is useful. Charles www.puuaukuu.net ----- Original Message -----=20 From: Chestnut=20 To: xitami@lists.xitami.org=20 Sent: Thursday, January 29, 2004 7:59 AM Subject: Re: [Xitami] web server w/ router (again) Steve, do you mean that you enter 24.209.120.13 when within your own = network, if so that will not work, need to be on the outside, another = computer accessing from somewhere other than your own place. The setup = appears to be fine. I accessed your site at 24... and it loads fine. = Even went to the link on The ORIGINAL DARWIN... and it loads, went to = one of the links from there, fine. It appears to me that your setup is = working as you want it to. I would say you are doing nothing wrong. Patrick ----- Original Message -----=20 From: Steven L. Haas=20 To: xitami@lists.xitami.org=20 Sent: Wednesday, January 28, 2004 12:43 AM Subject: [Xitami] web server w/ router (again) Ive posted a couple of times now about trying to run the xitami web = server from my computer. It's set up pn a broadband connection that is = shared with a Linksys router between two computers. I set this computer = (Windows XP) to have a manual IP of 192.168.1.2 (the router's IP is = 192.168.1.1) with the subnet mask being set to 255.255.255.0, the = default gateway as 192.168.1.1. When I ran ipconfig/all I got 3 DNS = numbers and put the first two in as my primary and alternate DNS = servers. I then set the router up in the advanced/DMZ HOST IP ADDRESS = to be 192.168.1.2 and turned the Xitami web server on. When I enter = http://192.168.1.1 into the browser it goes to the router set-up, which = is good. When I try to access pages on the internet, it works, which is = good. When I enter http://192.168.1.2 it loads the index.html page I = put in the Xitami server folder, which is great. Here's the problem, = however... when I look up my IP address online (the one assigned to me = via my ISP) I get 24.209.120.13. When I enter http://24.209.120.13 into = my browser, I get nothing, which is bad. It seems that I have = everything set up right and straightened out, but I still cant get = access to the web site Im trying to host from this computer. What am I = doing wrong, or what else can I do? ------=_NextPart_000_0010_01C3E660.A44C0440 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Chestnut,
 
Entering your external IP WILL access your web site, even = when=20 typed at the server (just tested it).  Your access.log file will = show your=20 gateway address (in Steve's case 192.168.1.1) instead of the usual = external=20 access IP.  Sometimes, in my instance anyway, you have to enter the = "http://" along with the IP.  But ... if virtual hosting is = active and=20 there's nothing at base host, then you get nothing.
 
I don't understand why it doesn't work the same as my = operation.  For=20 the sake of comparison:
 
Router is a Linksys BEFW11S4 wireless 4-port (first version, nearly = 2 years=20 old)
Router's address is changed to 10.168.1.1 and is also the = gateway
Subnet mask is 255.255.248.0 (I don't know why)
DHCP services are on with addresses starting at 10.168.1.100
DMZ Host is set to 10.168.1.50 (notice outside DHCP territory but = shouldn't=20 matter)
    (*I have tried Port Forward and that works slick = too!)
 
Computer is a hand-me-down P166 that I just upped the mem to 256MB; = 3.25GB=20 HD.
Running a Xitami 2.5c1 console (xidos.exe) in a DOS windows on = Windows 98SE=20 (does service work?)
HTTP port is changed to 1975 and FTP is disabled
Virtual Host is active (and actually working) but base host is = blank.
Server is manually configure to 10.168.1.50
Gateway is entered as 10.168.1.1 along with subnet mask=20 255.255.255.0
DNS IPs are also entered manually and can be found on=20 the router's Status page
Other servers installed: Fictional Daemon (FTP and Telnet) and = Mercury=20 Mail
Also on board: MySQL and PHP
 
I think that's all.  Hope this is useful.
 
Charles
 
----- Original Message -----
From:=20 Chestnut
Sent: Thursday, January 29, = 2004 7:59=20 AM
Subject: Re: [Xitami] web = server w/=20 router (again)

Steve, do you mean that you enter = 24.209.120.13=20 when within your own network, if so that will not work, need to be on = the=20 outside, another computer accessing from somewhere other than your own = place.=20 The setup appears to be fine. I accessed your site at 24... and it = loads fine.=20 Even went to the link on The ORIGINAL DARWIN... and it loads, went to = one of=20 the links from there, fine. It appears to me that your setup is = working as you=20 want it to. I would say you are doing nothing wrong.
Patrick
----- Original Message -----
From:=20 Steven L.=20 Haas
Sent: Wednesday, January 28, = 2004 12:43=20 AM
Subject: [Xitami] web server = w/ router=20 (again)

Ive posted a couple of times now = about trying=20 to run the xitami web server from my computer.  It's set up pn = a=20 broadband connection that is shared with a Linksys router between = two=20 computers.  I set this computer (Windows XP)  to have a = manual IP=20 of 192.168.1.2  (the router's IP is 192.168.1.1) with the = subnet mask=20 being set to 255.255.255.0, the default gateway as = 192.168.1.1.  When I=20 ran ipconfig/all I got 3 DNS numbers and put the first two in as my = primary=20 and alternate DNS servers.  I then set the router up in the=20 advanced/DMZ HOST IP ADDRESS to be 192.168.1.2 and turned the Xitami = web=20 server on.  When I enter http://192.168.1.1 into the browser = it goes to=20 the router set-up, which is good.  When I try to access pages = on the=20 internet, it works, which is good.  When I enter http://192.168.1.2 it loads the = index.html=20 page I put in the Xitami server folder, which is great.  Here's = the=20 problem, however... when I look up my IP address online (the one = assigned to=20 me via my ISP) I get 24.209.120.13.  When I enter http://24.209.120.13 into my = browser, I=20 get nothing, which is bad.  It seems that I have everything set = up=20 right and straightened out, but I still cant get access to the web = site Im=20 trying to host from this computer.  What am I doing wrong, or = what else=20 can I do?  =
------=_NextPart_000_0010_01C3E660.A44C0440-- From xitami@lists.xitami.org Thu Jan 29 20:11:56 2004 From: xitami@lists.xitami.org (Charles Schmidling) Date: Thu, 29 Jan 2004 12:11:56 -0800 Subject: [Xitami] Setting FTP Data Port to 20 References: <009801c3e68d$a56fca50$d8a5560a@amer.cisco.com> Message-ID: <001901c3e6a4$252f7cc0$6401a80a@comcast.net> Turn it off. In defaults.cfg: [Ftp] Enabled="0" Done deal. ----- Original Message ----- From: "John Stuppi" To: Sent: Thursday, January 29, 2004 9:30 AM Subject: [Xitami] Setting FTP Data Port to 20 > Is there a way to prevent the Xitami FTP server from trying other ports > for the FTP Data Port (default = 20) when using Active FTP? I need the > server to only use TCP 20 for troubleshooting purposes. Thanks in > advance. > > Thanks, > John > > > John Stuppi, CISSP > CCIE #11154, Security > Network Consulting Engineer > > Cisco Systems, Inc. > 1325 Campus Parkway > Wall Township, NJ 07753 > Office: (732) 751-6184 > Mobile: (732) 319-3886 > Fax: (732) 751-6002 > > > -- > Xitami Users Mailing List -- For Xitami support > To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami From xitami@lists.xitami.org Thu Jan 29 22:15:10 2004 From: xitami@lists.xitami.org (John Stuppi) Date: Thu, 29 Jan 2004 17:15:10 -0500 Subject: [Xitami] Setting FTP Data Port to 20 In-Reply-To: <001901c3e6a4$252f7cc0$6401a80a@comcast.net> Message-ID: <014101c3e6b5$5c521c60$d8a5560a@amer.cisco.com> Thanks Charles but I think you missed my point. I still want to use the FTP Server - what I want to prevent is Xitami "scanning for free ports": "data-port Specifies the port at which data connections will be made. Xitami scans for free ports, so this is simply the start of a range of ports. The port is shifted by whatever value was used for the server portbase. Default: 200. " Thanks, John John Stuppi, CISSP CCIE #11154, Security Network Consulting Engineer Cisco Systems, Inc. 1325 Campus Parkway Wall Township, NJ 07753 Office: (732) 751-6184 Mobile: (732) 319-3886 Fax: (732) 751-6002 -----Original Message----- From: xitami-admin@lists.xitami.org [mailto:xitami-admin@lists.xitami.org] On Behalf Of Charles Schmidling Sent: Thursday, January 29, 2004 3:12 PM To: xitami@lists.xitami.org Subject: Re: [Xitami] Setting FTP Data Port to 20 Turn it off. In defaults.cfg: [Ftp] Enabled="0" Done deal. ----- Original Message ----- From: "John Stuppi" To: Sent: Thursday, January 29, 2004 9:30 AM Subject: [Xitami] Setting FTP Data Port to 20 > Is there a way to prevent the Xitami FTP server from trying other > ports for the FTP Data Port (default = 20) when using Active FTP? I > need the server to only use TCP 20 for troubleshooting purposes. > Thanks in advance. > > Thanks, > John > > > John Stuppi, CISSP > CCIE #11154, Security > Network Consulting Engineer > > Cisco Systems, Inc. > 1325 Campus Parkway > Wall Township, NJ 07753 > Office: (732) 751-6184 > Mobile: (732) 319-3886 > Fax: (732) 751-6002 > > > -- > Xitami Users Mailing List -- For Xitami support > To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami -- Xitami Users Mailing List -- For Xitami support To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami From xitami@lists.xitami.org Thu Jan 29 22:39:54 2004 From: xitami@lists.xitami.org (Chestnut) Date: Thu, 29 Jan 2004 14:39:54 -0800 Subject: [Xitami] web server w/ router (again) References: <002101c3e680$e5c7e130$27fab1d8@2c01v01> <001301c3e6a3$b3f8f180$6401a80a@comcast.net> Message-ID: <002801c3e6b8$d11151d0$1dfab1d8@2c01v01> This is a multi-part message in MIME format. ------=_NextPart_000_0025_01C3E675.C27B79E0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Okay, the router does it. Now, I still don't see why he would want to = access the web server on HIS lan by using the external IP. As he said he = is able to access by the local IP, and as I said, and one other if I'm = not wrong, am able to access the site using the external IP, what would = be the reason for accessing it from the lan using the external IP??? It = seems all forwarding is being done and the site IS up and running = properly. Patrick ----- Original Message -----=20 From: Charles Schmidling=20 To: xitami@lists.xitami.org=20 Sent: Thursday, January 29, 2004 12:08 PM Subject: Re: [Xitami] web server w/ router (again) Chestnut, Entering your external IP WILL access your web site, even when typed = at the server (just tested it). Your access.log file will show your = gateway address (in Steve's case 192.168.1.1) instead of the usual = external access IP. Sometimes, in my instance anyway, you have to enter = the "http://" along with the IP. But ... if virtual hosting is active = and there's nothing at base host, then you get nothing. I don't understand why it doesn't work the same as my operation. For = the sake of comparison: Router is a Linksys BEFW11S4 wireless 4-port (first version, nearly 2 = years old) Router's address is changed to 10.168.1.1 and is also the gateway Subnet mask is 255.255.248.0 (I don't know why) DHCP services are on with addresses starting at 10.168.1.100 DMZ Host is set to 10.168.1.50 (notice outside DHCP territory but = shouldn't matter) (*I have tried Port Forward and that works slick too!) Computer is a hand-me-down P166 that I just upped the mem to 256MB; = 3.25GB HD. Running a Xitami 2.5c1 console (xidos.exe) in a DOS windows on Windows = 98SE (does service work?) HTTP port is changed to 1975 and FTP is disabled Virtual Host is active (and actually working) but base host is blank. Server is manually configure to 10.168.1.50 Gateway is entered as 10.168.1.1 along with subnet mask 255.255.255.0 DNS IPs are also entered manually and can be found on the router's = Status page Other servers installed: Fictional Daemon (FTP and Telnet) and Mercury = Mail Also on board: MySQL and PHP I think that's all. Hope this is useful. Charles www.puuaukuu.net ----- Original Message -----=20 From: Chestnut=20 To: xitami@lists.xitami.org=20 Sent: Thursday, January 29, 2004 7:59 AM Subject: Re: [Xitami] web server w/ router (again) Steve, do you mean that you enter 24.209.120.13 when within your own = network, if so that will not work, need to be on the outside, another = computer accessing from somewhere other than your own place. The setup = appears to be fine. I accessed your site at 24... and it loads fine. = Even went to the link on The ORIGINAL DARWIN... and it loads, went to = one of the links from there, fine. It appears to me that your setup is = working as you want it to. I would say you are doing nothing wrong. Patrick ----- Original Message -----=20 From: Steven L. Haas=20 To: xitami@lists.xitami.org=20 Sent: Wednesday, January 28, 2004 12:43 AM Subject: [Xitami] web server w/ router (again) Ive posted a couple of times now about trying to run the xitami = web server from my computer. It's set up pn a broadband connection that = is shared with a Linksys router between two computers. I set this = computer (Windows XP) to have a manual IP of 192.168.1.2 (the router's = IP is 192.168.1.1) with the subnet mask being set to 255.255.255.0, the = default gateway as 192.168.1.1. When I ran ipconfig/all I got 3 DNS = numbers and put the first two in as my primary and alternate DNS = servers. I then set the router up in the advanced/DMZ HOST IP ADDRESS = to be 192.168.1.2 and turned the Xitami web server on. When I enter = http://192.168.1.1 into the browser it goes to the router set-up, which = is good. When I try to access pages on the internet, it works, which is = good. When I enter http://192.168.1.2 it loads the index.html page I = put in the Xitami server folder, which is great. Here's the problem, = however... when I look up my IP address online (the one assigned to me = via my ISP) I get 24.209.120.13. When I enter http://24.209.120.13 into = my browser, I get nothing, which is bad. It seems that I have = everything set up right and straightened out, but I still cant get = access to the web site Im trying to host from this computer. What am I = doing wrong, or what else can I do? ------=_NextPart_000_0025_01C3E675.C27B79E0 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Okay, the router does it. Now, I still = don't see=20 why he would want to access the web server on HIS lan by using the = external IP.=20 As he said he is able to access by the local IP, and as I said, and one = other if=20 I'm not wrong, am able to access the site using the external IP, what = would be=20 the reason for accessing it from the lan using the external IP??? It = seems all=20 forwarding is being done and the site IS up and running = properly.
Patrick
----- Original Message -----
From:=20 Charles Schmidling
Sent: Thursday, January 29, = 2004 12:08=20 PM
Subject: Re: [Xitami] web = server w/=20 router (again)

Chestnut,
 
Entering your external IP WILL access your web site, = even when=20 typed at the server (just tested it).  Your access.log file will = show=20 your gateway address (in Steve's case 192.168.1.1) instead of the = usual=20 external access IP.  Sometimes, in my instance anyway, you have = to enter=20 the "http://" along with the IP.  But ... if virtual hosting = is=20 active and there's nothing at base host, then you get nothing.
 
I don't understand why it doesn't work the same as my = operation. =20 For the sake of comparison:
 
Router is a Linksys BEFW11S4 wireless 4-port (first version, = nearly 2=20 years old)
Router's address is changed to 10.168.1.1 and is also the = gateway
Subnet mask is 255.255.248.0 (I don't know why)
DHCP services are on with addresses starting at = 10.168.1.100
DMZ Host is set to 10.168.1.50 (notice outside DHCP territory but = shouldn't matter)
    (*I have tried Port Forward and that works = slick=20 too!)
 
Computer is a hand-me-down P166 that I just upped the mem to = 256MB;=20 3.25GB HD.
Running a Xitami 2.5c1 console (xidos.exe) in a DOS windows on = Windows=20 98SE (does service work?)
HTTP port is changed to 1975 and FTP is disabled
Virtual Host is active (and actually working) but base host is=20 blank.
Server is manually configure to 10.168.1.50
Gateway is entered as 10.168.1.1 along with subnet mask = 255.255.255.0
DNS IPs are also entered manually and can be found on=20 the router's Status page
Other servers installed: Fictional Daemon (FTP and Telnet) and = Mercury=20 Mail
Also on board: MySQL and PHP
 
I think that's all.  Hope this is useful.
 
Charles
 
----- Original Message -----
From:=20 Chestnut
Sent: Thursday, January 29, = 2004 7:59=20 AM
Subject: Re: [Xitami] web = server w/=20 router (again)

Steve, do you mean that you enter = 24.209.120.13=20 when within your own network, if so that will not work, need to be = on the=20 outside, another computer accessing from somewhere other than your = own=20 place. The setup appears to be fine. I accessed your site at 24... = and it=20 loads fine. Even went to the link on The ORIGINAL DARWIN... and it = loads,=20 went to one of the links from there, fine. It appears to me that = your setup=20 is working as you want it to. I would say you are doing nothing=20 wrong.
Patrick
----- Original Message ----- =
From:=20 Steven L.=20 Haas
Sent: Wednesday, January = 28, 2004=20 12:43 AM
Subject: [Xitami] web = server w/=20 router (again)

Ive posted a couple of times now = about trying=20 to run the xitami web server from my computer.  It's set up = pn a=20 broadband connection that is shared with a Linksys router between = two=20 computers.  I set this computer (Windows XP)  to have a = manual=20 IP of 192.168.1.2  (the router's IP is 192.168.1.1) with the = subnet=20 mask being set to 255.255.255.0, the default gateway as = 192.168.1.1. =20 When I ran ipconfig/all I got 3 DNS numbers and put the first two = in as my=20 primary and alternate DNS servers.  I then set the router up = in the=20 advanced/DMZ HOST IP ADDRESS to be 192.168.1.2 and turned the = Xitami web=20 server on.  When I enter http://192.168.1.1 into the = browser it goes=20 to the router set-up, which is good.  When I try to access = pages on=20 the internet, it works, which is good.  When I enter http://192.168.1.2 it loads the = index.html=20 page I put in the Xitami server folder, which is great.  = Here's the=20 problem, however... when I look up my IP address online (the one = assigned=20 to me via my ISP) I get 24.209.120.13.  When I enter http://24.209.120.13 into = my browser,=20 I get nothing, which is bad.  It seems that I have everything = set up=20 right and straightened out, but I still cant get access to the web = site Im=20 trying to host from this computer.  What am I doing wrong, or = what=20 else can I do? =20
------=_NextPart_000_0025_01C3E675.C27B79E0-- From xitami@lists.xitami.org Fri Jan 30 00:07:08 2004 From: xitami@lists.xitami.org (Ingo) Date: Thu, 29 Jan 2004 19:07:08 -0500 Subject: [Xitami] web server w/ router (again) Message-ID: <141790-220041530078326@earthlink.net>
Since switching to DSL from ISDN I have also lost the ability of accessing my server using the WWW address. So I modified the HOST file [local IP  www.address]
 
Ingo
 
-----------------------Original Message-----------------------
From: Chestnut
To: xitami@lists.xitami.org
Date: 1/29/2004 5:39:00 PM
Subject: Re: [Xitami] web server w/ router (again)
 
Okay, the router does it. Now, I still don't see why he would want to access the web server on HIS lan by using the external IP. As he said he is able to access by the local IP, and as I said, and one other if I'm not wrong, am able to access the site using the external IP, what would be the reason for accessing it from the lan using the external IP??? It seems all forwarding is being done and the site IS up and running properly.
Patrick
----- Original Message -----
Sent: Thursday, January 29, 2004 12:08 PM
Subject: Re: [Xitami] web server w/ router (again)

Chestnut,
 
Entering your external IP WILL access your web site, even when typed at the server (just tested it).  Your access.log file will show your gateway address (in Steve's case 192.168.1.1) instead of the usual external access IP.  Sometimes, in my instance anyway, you have to enter the "http://" along with the IP.  But ... if virtual hosting is active and there's nothing at base host, then you get nothing.
 
I don't understand why it doesn't work the same as my operation.  For the sake of comparison:
 
Router is a Linksys BEFW11S4 wireless 4-port (first version, nearly 2 years old)
Router's address is changed to 10.168.1.1 and is also the gateway
Subnet mask is 255.255.248.0 (I don't know why)
DHCP services are on with addresses starting at 10.168.1.100
DMZ Host is set to 10.168.1.50 (notice outside DHCP territory but shouldn't matter)
    (*I have tried Port Forward and that works slick too!)
 
Computer is a hand-me-down P166 that I just upped the mem to 256MB; 3.25GB HD.
Running a Xitami 2.5c1 console (xidos.exe) in a DOS windows on Windows 98SE (does service work?)
HTTP port is changed to 1975 and FTP is disabled
Virtual Host is active (and actually working) but base host is blank.
Server is manually configure to 10.168.1.50
Gateway is entered as 10.168.1.1 along with subnet mask 255.255.255.0
DNS IPs are also entered manually and can be found on the router's Status page
Other servers installed: Fictional Daemon (FTP and Telnet) and Mercury Mail
Also on board: MySQL and PHP
 
I think that's all.  Hope this is useful.
 
Charles
 
----- Original Message -----
From: Chestnut
Sent: Thursday, January 29, 2004 7:59 AM
Subject: Re: [Xitami] web server w/ router (again)

Steve, do you mean that you enter 24.209.120.13 when within your own network, if so that will not work, need to be on the outside, another computer accessing from somewhere other than your own place. The setup appears to be fine. I accessed your site at 24... and it loads fine. Even went to the link on The ORIGINAL DARWIN... and it loads, went to one of the links from there, fine. It appears to me that your setup is working as you want it to. I would say you are doing nothing wrong.
Patrick
----- Original Message -----
Sent: Wednesday, January 28, 2004 12:43 AM
Subject: [Xitami] web server w/ router (again)

Ive posted a couple of times now about trying to run the xitami web server from my computer.  It's set up pn a broadband connection that is shared with a Linksys router between two computers.  I set this computer (Windows XP)  to have a manual IP of 192.168.1.2  (the router's IP is 192.168.1.1) with the subnet mask being set to 255.255.255.0, the default gateway as 192.168.1.1.  When I ran ipconfig/all I got 3 DNS numbers and put the first two in as my primary and alternate DNS servers.  I then set the router up in the advanced/DMZ HOST IP ADDRESS to be 192.168.1.2 and turned the Xitami web server on.  When I enter http://192.168.1.1 into the browser it goes to the router set-up, which is good.  When I try to access pages on the internet, it works, which is good.  When I enter http://192.168.1.2 it loads the index.html page I put in the Xitami server folder, which is great.  Here's the problem, however... when I look up my IP address online (the one assigned to me via my ISP) I get 24.209.120.13.  When I enter http://24.209.120.13 into my browser, I get nothing, which is bad.  It seems that I have everything set up right and straightened out, but I still cant get access to the web site Im trying to host from this computer.  What am I doing wrong, or what else can I do? 
From xitami@lists.xitami.org Fri Jan 30 02:29:25 2004 From: xitami@lists.xitami.org (Charles Schmidling) Date: Thu, 29 Jan 2004 18:29:25 -0800 Subject: [Xitami] Setting FTP Data Port to 20 References: <014101c3e6b5$5c521c60$d8a5560a@amer.cisco.com> Message-ID: <001601c3e6d8$e1832aa0$6401a80a@comcast.net> Sorry, my bad, misread your note. Didn't know it scanned. When I ran the FTP service, it was shifted to port 1916. Maybe directly setting the port might help. I had download issues with the FTP service (premature completeness) so switched to another. [cut another faux pas] I did find this in Xitami.cfg (for use in defaults.cfg): # Specifies the port at which data connections will be made. Xitami # scans for free ports, so this is simply the start of a range of # ports. The port is shifted by whatever value was used for the # server portbase. [ftp] data-port=200 Whatever that means. It may either allow you to shift the starting scan point or set the starting scan point (say at 20) and it might stop there. Don't know. Worth a shot. Much luck, Charles ----- Original Message ----- From: "John Stuppi" To: Sent: Thursday, January 29, 2004 2:15 PM Subject: RE: [Xitami] Setting FTP Data Port to 20 > Thanks Charles but I think you missed my point. I still want to use the > FTP Server - what I want to prevent is Xitami "scanning for free ports": > > "data-port > Specifies the port at which data connections will be made. Xitami scans > for free ports, so this is simply the start of a range of ports. The > port is shifted by whatever value was used for the server portbase. > Default: 200. " > > > > Thanks, > John > > > John Stuppi, CISSP > CCIE #11154, Security > Network Consulting Engineer > > Cisco Systems, Inc. > 1325 Campus Parkway > Wall Township, NJ 07753 > Office: (732) 751-6184 > Mobile: (732) 319-3886 > Fax: (732) 751-6002 > > > -----Original Message----- > From: xitami-admin@lists.xitami.org > [mailto:xitami-admin@lists.xitami.org] On Behalf Of Charles Schmidling > Sent: Thursday, January 29, 2004 3:12 PM > To: xitami@lists.xitami.org > Subject: Re: [Xitami] Setting FTP Data Port to 20 > > > Turn it off. > > In defaults.cfg: > [Ftp] > Enabled="0" > > Done deal. > > > ----- Original Message ----- > From: "John Stuppi" > To: > Sent: Thursday, January 29, 2004 9:30 AM > Subject: [Xitami] Setting FTP Data Port to 20 > > > > Is there a way to prevent the Xitami FTP server from trying other > > ports for the FTP Data Port (default = 20) when using Active FTP? I > > need the server to only use TCP 20 for troubleshooting purposes. > > Thanks in advance. > > > > Thanks, > > John > > > > > > John Stuppi, CISSP > > CCIE #11154, Security > > Network Consulting Engineer > > > > Cisco Systems, Inc. > > 1325 Campus Parkway > > Wall Township, NJ 07753 > > Office: (732) 751-6184 > > Mobile: (732) 319-3886 > > Fax: (732) 751-6002 > > > > > > -- > > Xitami Users Mailing List -- For Xitami support > > To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami > > > -- > Xitami Users Mailing List -- For Xitami support > To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami > > > -- > Xitami Users Mailing List -- For Xitami support > To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami From xitami@lists.xitami.org Fri Jan 30 11:58:44 2004 From: xitami@lists.xitami.org (John Stuppi) Date: Fri, 30 Jan 2004 06:58:44 -0500 Subject: [Xitami] Setting FTP Data Port to 20 In-Reply-To: <001601c3e6d8$e1832aa0$6401a80a@comcast.net> Message-ID: <00ac01c3e728$6a07ccb0$6900000a@amer.cisco.com> Yep, saw that - I'll give that a shot - thanks Charles! Thanks, John John Stuppi, CISSP CCIE #11154, Security Network Consulting Engineer Cisco Systems, Inc. 1325 Campus Parkway Wall Township, NJ 07753 Office: (732) 751-6184 Mobile: (732) 319-3886 Fax: (732) 751-6002 -----Original Message----- From: xitami-admin@lists.xitami.org [mailto:xitami-admin@lists.xitami.org] On Behalf Of Charles Schmidling Sent: Thursday, January 29, 2004 9:29 PM To: xitami@lists.xitami.org Subject: Re: [Xitami] Setting FTP Data Port to 20 Sorry, my bad, misread your note. Didn't know it scanned. When I ran the FTP service, it was shifted to port 1916. Maybe directly setting the port might help. I had download issues with the FTP service (premature completeness) so switched to another. [cut another faux pas] I did find this in Xitami.cfg (for use in defaults.cfg): # Specifies the port at which data connections will be made. Xitami # scans for free ports, so this is simply the start of a range of # ports. The port is shifted by whatever value was used for the # server portbase. [ftp] data-port=200 Whatever that means. It may either allow you to shift the starting scan point or set the starting scan point (say at 20) and it might stop there. Don't know. Worth a shot. Much luck, Charles ----- Original Message ----- From: "John Stuppi" To: Sent: Thursday, January 29, 2004 2:15 PM Subject: RE: [Xitami] Setting FTP Data Port to 20 > Thanks Charles but I think you missed my point. I still want to use > the FTP Server - what I want to prevent is Xitami "scanning for free > ports": > > "data-port > Specifies the port at which data connections will be made. Xitami > scans for free ports, so this is simply the start of a range of ports. > The port is shifted by whatever value was used for the server > portbase. > Default: 200. " > > > > Thanks, > John > > > John Stuppi, CISSP > CCIE #11154, Security > Network Consulting Engineer > > Cisco Systems, Inc. > 1325 Campus Parkway > Wall Township, NJ 07753 > Office: (732) 751-6184 > Mobile: (732) 319-3886 > Fax: (732) 751-6002 > > > -----Original Message----- > From: xitami-admin@lists.xitami.org > [mailto:xitami-admin@lists.xitami.org] On Behalf Of Charles Schmidling > Sent: Thursday, January 29, 2004 3:12 PM > To: xitami@lists.xitami.org > Subject: Re: [Xitami] Setting FTP Data Port to 20 > > > Turn it off. > > In defaults.cfg: > [Ftp] > Enabled="0" > > Done deal. > > > ----- Original Message ----- > From: "John Stuppi" > To: > Sent: Thursday, January 29, 2004 9:30 AM > Subject: [Xitami] Setting FTP Data Port to 20 > > > > Is there a way to prevent the Xitami FTP server from trying other > > ports for the FTP Data Port (default = 20) when using Active FTP? I > > need the server to only use TCP 20 for troubleshooting purposes. > > Thanks in advance. > > > > Thanks, > > John > > > > > > John Stuppi, CISSP > > CCIE #11154, Security > > Network Consulting Engineer > > > > Cisco Systems, Inc. > > 1325 Campus Parkway > > Wall Township, NJ 07753 > > Office: (732) 751-6184 > > Mobile: (732) 319-3886 > > Fax: (732) 751-6002 > > > > > > -- > > Xitami Users Mailing List -- For Xitami support > > To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami > > > -- > Xitami Users Mailing List -- For Xitami support > To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami > > > -- > Xitami Users Mailing List -- For Xitami support > To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami -- Xitami Users Mailing List -- For Xitami support To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami From xitami@lists.xitami.org Wed Jan 28 07:03:02 2004 From: xitami@lists.xitami.org (Admin (MRJ)) Date: Wed, 28 Jan 2004 00:03:02 -0700 Subject: [Xitami] Suggestions Please References: Message-ID: <000c01c3e56c$c5789ab0$c901a8c0@mrjx> PHP is free, just go to their home page. So is MySQL but add MyODBC running it on windows For mail server, try MailEnable Standard. I wouldn't know abou tthe dns cause I have my own static. > Running Xitami as home network webserver > Win98se > DSL > Dynamic IP > > 1. Free SMTP server software > 2. Free Dynamic IP update client > (using hn.org [hammernode] for dynamic IP domain service) > 3. Free PHP for windows source or software > 4. Free MYSQL for windows source or software > > I know I can dig around and find the above, but trying to save time. > > Also I am familiar with WebApps Portal Perl/cg scripts (www.web-app.org), > would like to colaborate with others on setting up WebApps on a windows web > server, as WebApps doesn't support Windows. *I'm not a perl/cgi script > programmer, although I have stumbled through a couple of simple hacks. > > Any help appreciated > > > > -- > Xitami Users Mailing List -- For Xitami support > To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami >