Message-ID: <001a01c480fa$e3d01220$931bb650@bc>
This is a multi-part message in MIME format.
------=_NextPart_000_0017_01C4810B.A6F73A20
Content-Type: text/plain;charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Untitled DocumentSPAM SUCKS
--
Email.it, the professional e-mail, gratis per te: http://www.email.it/f
Sponsor:
Digitalpix stampa le tue migliori foto digitali
* su vera carta fotografica professionale.
Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=1532&d=13-8
------=_NextPart_000_0017_01C4810B.A6F73A20
Content-Type: text/html;charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Untitled Document
SPAM SUCKS
----
Email.it, the professional e-mail, gratis per te:clicca=
qui
Sponsor:
Acquista ora Email.it Phone Card e comincia a risparmiare sulle tue telefon=
ate! Clicca e scopri l'offerta
Clicca qui
------=_NextPart_000_0017_01C4810B.A6F73A20--
From xitami@lists.xitami.org Wed Aug 18 04:08:13 2004
From: xitami@lists.xitami.org (xitami@lists.xitami.org)
Date: Tue, 17 Aug 2004 23:08:13 EDT
Subject: [Xitami] Getting the FTP side up and running
Message-ID:
-------------------------------1092798493
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit
The HTTP side of my site is running just fine, but I am having trouble
getting my system configured for FTP. The goal is a plain vanilla anonymous FTP of a
pot of files stored in a single directory.
As just one example, I can put on the files in an FTPROOT directory in the
XITAMI folder, but I cannot seem to set the configuration file to look in that
directory. I keep getting error messages that say the file cannot be found.
I am sure the answer is quite simple, but would appreciate some insight into
what I'm doing wrong.
Ralph
-------------------------------1092798493
Content-Type: text/html; charset="US-ASCII"
Content-Transfer-Encoding: quoted-printable
The HTTP side of my site is running just fine, but I am having trouble=20=
getting my system configured for FTP. The goal is a plain vanilla anonymous=20=
FTP of a pot of files stored in a single directory.
As just one example, I can put on the files in an FTPROOT directory in=20=
the XITAMI folder, but I cannot seem to set the configuration file to look i=
n that directory. I keep getting error messages that say the file cannot be=20=
found.
I am sure the answer is quite simple, but would appreciate some insight=
into what I'm doing wrong.
Ralph
-------------------------------1092798493--
From xitami@lists.xitami.org Wed Aug 18 19:11:20 2004
From: xitami@lists.xitami.org (Johannes Prost)
Date: Wed, 18 Aug 2004 12:11:20 -0600
Subject: [Xitami] Getting the FTP side up and running
In-Reply-To:
Message-ID: <41234768.1039.11BBBB1@localhost>
Hello Ralph,
can provide more details ; version of xitami ?
Am 17 Aug 2004 um 23:08 hat Gyrobee@aol.com geschrieben:
> The HTTP side of my site is running just fine, but I am having trouble
> getting my system configured for FTP. The goal is a plain vanilla anonymous FTP of a
> pot of files stored in a single directory.
>
> As just one example, I can put on the files in an FTPROOT directory in the
> XITAMI folder, but I cannot seem to set the configuration file to look in that
> directory. I keep getting error messages that say the file cannot be found.
>
> I am sure the answer is quite simple, but would appreciate some insight into
> what I'm doing wrong.
>
> Ralph
>
Johannes
-----------------------
Johannes Prost
xitami@pastryworld.ca
From xitami@lists.xitami.org Wed Aug 18 19:51:15 2004
From: xitami@lists.xitami.org (xitami@lists.xitami.org)
Date: Wed, 18 Aug 2004 14:51:15 EDT
Subject: [Xitami] Getting the FTP side up and running
Message-ID: <67.30e1bc1f.2e54ff23@aol.com>
-------------------------------1092855075
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit
The version I am running is 2.5c2 - downloaded a week or so ago. All the HTTP
directories are in WEBPAGES in the master XITAMI directory and work just
fine. I don't really care where I put the files for FTP downloading - I have tried
an FTPROOT directory in the XITAMI folder and also the same directory in the
WEBPAGES folder.
In any case, I made the defaults.cfg copy and despite tinkering with the ftp
directory in the file, I typically get some version of a "file not found"
notice when I try anonymous FTP access. Occasionally I will get a directory
listing where the text files suggest that I have ended up in the PULBLIC directory,
but that is rare.
By the way, both HTTP and FTP on the same bunch of files has been working for
seven years on an old machine running Microsoft PWS so I know the basic
internal lnks are sound. The HTTP side of the site is now much superior to the old
one now that I am using Xitami, so it is just a bit frustrating trying to get
the FTP elements working. A sample can be found on:
http://taggart.glg.msu.edu/gyro/gbee.htm
If you scrioll down the page, you will find a link to the GYROBEE LOGO - the
link points to:
ftp://taggart.glg.msu.edu/gblogo.gif
and would, with the old system, result in the retrieval of the GIF file. All
the FTP links are intended to be that simple - just a way to retrieve
miscellaneous files that are stored on the system and intended for use by visitors to
the site.
Thanks for your reply.....Ralph
-------------------------------1092855075
Content-Type: text/html; charset="US-ASCII"
Content-Transfer-Encoding: quoted-printable
The version I am running is 2.5c2 - downloaded a week or so ago. All th=
e HTTP directories are in WEBPAGES in the master XITAMI directory and work j=
ust fine. I don't really care where I put the files for FTP downloading - I=20=
have tried an FTPROOT directory in the XITAMI folder and also the same direc=
tory in the WEBPAGES folder.
In any case, I made the defaults.cfg copy and despite tinkering with th=
e ftp directory in the file, I typically get some version of a "file no=
t found" notice when I try anonymous FTP access. Occasionally I will get a d=
irectory listing where the text files suggest that I have ended up in the PU=
LBLIC directory, but that is rare.
By the way, both HTTP and FTP on the same bunch of files has been worki=
ng for seven years on an old machine running Microsoft PWS so I know the bas=
ic internal lnks are sound. The HTTP side of the site is now much superior t=
o the old one now that I am using Xitami, so it is just a bit frustrating tr=
ying to get the FTP elements working. A sample can be found on:
If you scrioll down the page, you will find a link to the GYROBEE LOGO=20=
- the link points to:
and would, with the old system, result in the retrieval of the GIF file=
. All the FTP links are intended to be that simple - just a way to retrieve=20=
miscellaneous files that are stored on the system and intended for use by vi=
sitors to the site.
Thanks for your reply.....Ralph
-------------------------------1092855075--
From xitami@lists.xitami.org Wed Aug 18 23:35:15 2004
From: xitami@lists.xitami.org (Johannes Prost)
Date: Wed, 18 Aug 2004 16:35:15 -0600
Subject: [Xitami] Getting the FTP side up and running
In-Reply-To: <67.30e1bc1f.2e54ff23@aol.com>
Message-ID: <41238543.22796.20D5AA7@localhost>
Hi Ralph,
My system runs with the same version and I'm only just half a year familiar with websites and all
that "Stuff". Please excuse me, if I explain this a bit like a newcomer.
It sounds for me that you copied the xitami.cfg to the default.cfg. That is not the way it should
be. You create a default.cfg and put in the settings you prefer for YOUR system. Only that, nothing
else. Xitami will read first the xitami.cfg and after that the default.cfg and the settings in the
default.cfg will override the ones in the xitami.cfg.
I have some directories in the ftproot from xitami and I have no problems to get my files.
The directories are looking like this:
..\ftproot\directoryname-1
..\ftproot\directoryname-2
one user can access only one of the two directories with the rights I gave them.
You are looking for a user "anonymus" create one and as far as I understood, this user should only
be able to retrieve files. He will get the right "G" for get.
Your ftpdirs.aut should look now like this
[directoryname-1]
anonymus = "G"
[directoryname-2]
anonymus = "G"
make sure that you have one space between = and "G"
and your ftpusers.aut should look like
[anonymus]
Access = "G"
Aliases = "0"
Hard-quota = ""
Password = "anonymus"
Pipe = ""
Root = "directoryname-1"
Soft-quota = ""
Use-quotas = "0"
Same thing here with the space. If you like, you can disable the password. If I'm correct, it will
look like password = "".
I don't have anonymus access.
I hope this will be correct and it is from help for you.
Johannes
-----------------------
Johannes Prost
xitami@pastryworld.ca
From xitami@lists.xitami.org Thu Aug 19 00:40:56 2004
From: xitami@lists.xitami.org (John Jonas)
Date: Wed, 18 Aug 2004 18:40:56 -0500
Subject: [Xitami] Where is the list archive?
In-Reply-To: <41238543.22796.20D5AA7@localhost>
References: <41238543.22796.20D5AA7@localhost>
Message-ID: <4123E908.9080709@arbor-freight.com>
Help, I lost the url this mailing list's archive. I though it was in
each month's reminder notice and deleted the message with the url.
It would be nice if there was a link to it at xitami.com, but you can't
have everything.
From xitami@lists.xitami.org Thu Aug 19 02:41:42 2004
From: xitami@lists.xitami.org (Michael diLorenzo)
Date: Wed, 18 Aug 2004 21:41:42 -0400
Subject: [Xitami] Getting the FTP side up and running
In-Reply-To: <67.30e1bc1f.2e54ff23@aol.com>
References: <67.30e1bc1f.2e54ff23@aol.com>
Message-ID:
Hi Ralp,
Put this in your ftpusers.aut file:
[Anonymous]
access=G
password=""
root=/xitami/ftproot
And you should be all set to access ../xitami/ftproot and the files
therein.
Michael
On Wed, 18 Aug 2004 14:51:15 -0400 (EDT), wrote:
> The version I am running is 2.5c2 - downloaded a week or so ago. All the
> HTTP
> directories are in WEBPAGES in the master XITAMI directory and work just
> fine. I don't really care where I put the files for FTP downloading - I
> have tried
> an FTPROOT directory in the XITAMI folder and also the same directory in
> the
> WEBPAGES folder.
>
> In any case, I made the defaults.cfg copy and despite tinkering with the
> ftp
> directory in the file, I typically get some version of a "file not found"
> notice when I try anonymous FTP access. Occasionally I will get a
> directory
> listing where the text files suggest that I have ended up in the PULBLIC
> directory,
> but that is rare.
>
> By the way, both HTTP and FTP on the same bunch of files has been
> working for
> seven years on an old machine running Microsoft PWS so I know the basic
> internal lnks are sound. The HTTP side of the site is now much superior
> to the old
> one now that I am using Xitami, so it is just a bit frustrating trying
> to get
> the FTP elements working. A sample can be found on:
>
> http://taggart.glg.msu.edu/gyro/gbee.htm
>
> If you scrioll down the page, you will find a link to the GYROBEE LOGO -
> the
> link points to:
>
> ftp://taggart.glg.msu.edu/gblogo.gif
>
> and would, with the old system, result in the retrieval of the GIF file.
> All
> the FTP links are intended to be that simple - just a way to retrieve
> miscellaneous files that are stored on the system and intended for use
> by visitors to
> the site.
>
> Thanks for your reply.....Ralph
--
Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/
From xitami@lists.xitami.org Wed Aug 18 20:18:45 2004
From: xitami@lists.xitami.org (Jim Banks)
Date: Wed, 18 Aug 2004 16:18:45 -0300
Subject: [Xitami] Getting the FTP side up and running
In-Reply-To: <67.30e1bc1f.2e54ff23@aol.com>
Message-ID: <41238165.13650.7B7174@localhost>
You have to change
ftp://taggart.glg.msu.edu/gblogo.gif
to
ftp://taggart.glg.msu.edu/
then you
need to go to the main screen of Xitami
click on configuration
click on ftp ---> top right corner
click on top Define button
click on new
fill in information
make sure you click on save all the way out.
On 18 Aug 2004 at 14:51, Gyrobee@aol.com wrote:
>
> The version I am running is 2.5c2 - downloaded a week or so ago. All the HTTP directories
> are in WEBPAGES in the master XITAMI directory and work just fine. I don't really care
> where I put the files for FTP downloading - I have tried an FTPROOT directory in the
> XITAMI folder and also the same directory in the WEBPAGES folder.
>
> In any case, I made the defaults.cfg copy and despite tinkering with the ftp directory in
> the file, I typically get some version ofa "file not found" notice when I try anonymous FTP
> access. Occasionally I will get a directory listing where the text files suggest that I have
> ended up in the PULBLIC directory, but that is rare.
>
> By the way, both HTTP and FTP on the same bunch of files has been working for seven years
> on an old machine running Microsoft PWS so I know the basic internal lnks are sound. The
> HTTP side of the site is now much superior to the old one now that I am using Xitami, so it
> is just a bit frustrating trying to get the FTP elements working. A sample can be found on:
>
> http://taggart.glg.msu.edu/gyro/gbee.htm
>
> If you scrioll down the page, you will find a link to the GYROBEE LOGO - the link points to:
>
> ftp://taggart.glg.msu.edu/gblogo.gif
>
> and would, with the old system, result in the retrieval of the GIF file. All the FTP links are
> intended to be that simple - just a way to retrieve miscellaneous files that are stored on
> the system and intended for use by visitors to the site.
>
> Thanks for your reply.....Ralph
>
>
From xitami@lists.xitami.org Thu Aug 19 15:34:42 2004
From: xitami@lists.xitami.org (xitami@lists.xitami.org)
Date: Thu, 19 Aug 2004 10:34:42 -0400
Subject: [Xitami] Getting the FTP side up and running
Message-ID: <49E3CC1B.20099369.00180B01@aol.com>
Thanks to all - especially Johannes - who replied with solutions from the simple to complex. The FTP service is now running fine and the solution was simple:
The defaults.cfg file contained just the FTP service data wit this root:
root=/xitami/ftproot
The anonymous section of the ftpusers.aut was modified as follows:
access=G
password= ""
root= /xitami/ftproot
For whatever reason, the space after the = in the ftpusers.aut (password and root) file appear to be critical.
Ralph
From xitami@lists.xitami.org Thu Aug 19 15:38:36 2004
From: xitami@lists.xitami.org (Johannes Prost)
Date: Thu, 19 Aug 2004 08:38:36 -0600
Subject: [Xitami] Getting the FTP side up and running
In-Reply-To: <49E3CC1B.20099369.00180B01@aol.com>
Message-ID: <4124670C.22762.F5D59@localhost>
Good morning Ralph,
good to hear it's running.
Johannes
-----------------------
Johannes Prost
xitami@pastryworld.ca
From xitami@lists.xitami.org Thu Aug 19 15:44:22 2004
From: xitami@lists.xitami.org (Johannes Prost)
Date: Thu, 19 Aug 2004 08:44:22 -0600
Subject: (Fwd) Re: [Xitami] Where are the Xitami Archives???
Message-ID: <41246866.5649.14A79A@localhost>
Hi John,
here a forwarded message from the list.
Johannes
------- Weitergeleitete Nachricht / Forwarded message -------
Von: Ewen McNeill
Betreff: Re: [Xitami] Where are the Xitami Archives???
An: xitami@lists.xitami.org
Antwort an: xitami@lists.xitami.org
Datum: Thu, 01 Jul 2004 07:11:03 +1200
[ Doppelklick auf diese Zeile zeigt Optionen f=FCr Abo-Liste ]
In message , "R O" writes:
>I want to browse and seach all the emails sent to the Xitami support list=
-
>are these archived? If so, how do I get access to them? Please tell me
>there it can be done via a website...
http://lists.xitami.org/pipermail/xitami/
which lies behind the "Xitami Archives" link on:
http://lists.xitami.org/mailman/listinfo/xitami
The latter URL being listed on every single post to the mailing list.
Ewen
--
Ewen McNeill, System Administrator, iMatix Corporation www.imatix.com
--
Xitami Users Mailing List -- For Xitami support
To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami
--- Ende der weitergeleiteten Nachricht / End of forwarded message ---Joha=
nnes
-----------------------
Johannes Prost
xitami@pastryworld.ca
From xitami@lists.xitami.org Thu Aug 19 08:49:59 2004
From: xitami@lists.xitami.org (Brian {Hamilton Kelly})
Date: Thu, 19 Aug 2004 08:49:59 +0100 (BST)
Subject: [Xitami] Getting the FTP side up and running
Message-ID: <57366@dsl.co.uk>
In message <41238543.22796.20D5AA7@localhost> "Johannes Prost" writes:
[snip]
> one user can access only one of the two directories with the rights I gav=
e them.
> You are looking for a user "anonymus" create one and as far as I understo=
od, this user should only=20
> be able to retrieve files. He will get the right "G" for get.
>=20
> Your ftpdirs.aut should look now like this
>=20
> [directoryname-1]
> anonymus =3D "G"
> [directoryname-2]
> anonymus =3D "G"
>=20
> make sure that you have one space between =3D and "G"
>=20
> and your ftpusers.aut should look like=20
>=20
> [anonymus]
> Access =3D "G"
> Aliases =3D "0"
> Hard-quota =3D ""
> Password =3D "anonymus"
One little point: the "username" for FTP should be spelt properly, as
"anonymous". Also, surely there should be no password specified for the
anonymous FTP client, because the convention is that each user provides
his/her e-mail address as password.
--=20
Brian {Hamilton Kelly} bhk@dsl.co.uk
"I don't use Linux. I prefer to use an OS supported by a large multi-
national vendor, with a good office suite, excellent network/internet
software and decent hardware support."
From xitami@lists.xitami.org Thu Aug 19 08:54:36 2004
From: xitami@lists.xitami.org (Brian {Hamilton Kelly})
Date: Thu, 19 Aug 2004 08:54:36 +0100 (BST)
Subject: [Xitami] Where is the list archive?
Message-ID: <57367@dsl.co.uk>
In message <4123E908.9080709@arbor-freight.com> "John Jonas" writes:
> Help, I lost the url this mailing list's archive. I though it was in
> each month's reminder notice and deleted the message with the url.
It's better than that; it's in EVERY message on the list (including the
one with your query, and in this reply from me).
You're using Mozilla; if you go to the menubar and click on
View->Show->Headers->All, you will see that one of the headers reads:
List-Archive:
> It would be nice if there was a link to it at xitami.com, but you can't
> have everything.
Remembering that the list is hosted by xitami.org and not .com, then
there might be something in that.
--
Brian {Hamilton Kelly} bhk@dsl.co.uk
"I don't use Linux. I prefer to use an OS supported by a large multi-
national vendor, with a good office suite, excellent network/internet
software and decent hardware support."
From xitami@lists.xitami.org Fri Aug 20 17:03:31 2004
From: xitami@lists.xitami.org (Martin)
Date: Fri, 20 Aug 2004 10:03:31 -0600
Subject: [Xitami] New install
Message-ID:
I just installed Xitami and am tring to get to the admin page. I changed the
following file. xitami.aut
Admin=
I am assumeing this is where the password goes I left it blank for now.
From xitami@lists.xitami.org Fri Aug 20 16:25:11 2004
From: xitami@lists.xitami.org (Johannes Prost)
Date: Fri, 20 Aug 2004 09:25:11 -0600
Subject: [Xitami] New install
In-Reply-To:
Message-ID: <4125C377.17953.38323B@localhost>
Hello Martin,
what does "tring" mean ? But I assume a problem. Sorry english is not my native language.
You shouldn't change anything in xitami.cfg and xitami.aut
Create a file called default.aut and if you have to make changes to xitami make them in xitami.cfg
Regards your admin entry: As I mentioned above, create a file called default.cfg
Put the folloing in there
[/admin]
Your Username = "Your Password"
That is all. Make sure you have a space between = and "
Leave the xitami.aut as is. That should do the job and you should be able to open up the GUI from
your browser.
Am 20 Aug 2004 um 10:03 hat Martin geschrieben:
> I just installed Xitami and am tring to get to the admin page. I changed the
> following file. xitami.aut
>
> Admin=
>
>
> I am assumeing this is where the password goes I left it blank for now.
>
>
> --
> Xitami Users Mailing List -- For Xitami support
> To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami
Johannes
-----------------------
Johannes Prost
xitami@pastryworld.ca
From xitami@lists.xitami.org Sat Aug 21 21:19:26 2004
From: xitami@lists.xitami.org (Alex Barna)
Date: Sat, 21 Aug 2004 15:19:26 -0500
Subject: [Xitami] Add-ons for Xitami
Message-ID: <4127AE4E.A9850789@mn.rr.com>
On the page at http://www.xitami.com/addons.htm
Under Other Products there is a listing for;
PerlChat is a Perl-based chat application, developed using Xitami.
With a link to; http://www.perlchat.dk/html/perlchat.dk/index.html
www.perlchat.dk is not a valid address.
Does anyone know if this program will run on windows XP & what the correct
address is, or if there is other chat software that works on XP & xitami?
-
Alex,
From xitami@lists.xitami.org Sat Aug 21 21:23:25 2004
From: xitami@lists.xitami.org (Reply_To)
Date: Sat, 21 Aug 2004 15:23:25 -0500
Subject: [Xitami] Add-ons for Xitami
In-Reply-To: <4127AE4E.A9850789@mn.rr.com>
Message-ID:
http://perlchat.sourceforge.net/
> On the page at http://www.xitami.com/addons.htm
>
> Under Other Products there is a listing for;
> PerlChat is a Perl-based chat application, developed using Xitami.
>
> With a link to; http://www.perlchat.dk/html/perlchat.dk/index.html
>
> www.perlchat.dk is not a valid address.
>
> Does anyone know if this program will run on windows XP & what the correct
> address is, or if there is other chat software that works on XP & xitami?
>
> -
> Alex
From xitami@lists.xitami.org Sat Aug 21 21:30:58 2004
From: xitami@lists.xitami.org (Reply_To)
Date: Sat, 21 Aug 2004 15:30:58 -0500
Subject: [Xitami] Add-ons for Xitami
In-Reply-To: <4127AE4E.A9850789@mn.rr.com>
Message-ID:
http://perlchat.sourceforge.net/
> On the page at http://www.xitami.com/addons.htm
>
> Under Other Products there is a listing for;
> PerlChat is a Perl-based chat application, developed using Xitami.
>
> With a link to; http://www.perlchat.dk/html/perlchat.dk/index.html
>
> www.perlchat.dk is not a valid address.
>
> Does anyone know if this program will run on windows XP & what the correct
> address is, or if there is other chat software that works on XP & xitami?
>
> -
> Alex
From xitami@lists.xitami.org Sun Aug 22 23:38:16 2004
From: xitami@lists.xitami.org (ufonda smith)
Date: Sun, 22 Aug 2004 16:38:16 -0600
Subject: [Xitami] Add-ons for Xitami
Message-ID:
Yes, it works with XP. I run an old VP chat server and it works fine for
posting server stats on the what's hot tab
Tisa
>From: Alex Barna
>Reply-To: xitami@lists.xitami.org
>To: xitami lists
>Subject: [Xitami] Add-ons for Xitami
>Date: Sat, 21 Aug 2004 15:19:26 -0500
>MIME-Version: 1.0
>Received: from mc5-f35.hotmail.com ([65.54.252.42]) by mc5-s2.hotmail.com
>with Microsoft SMTPSVC(5.0.2195.6713); Sat, 21 Aug 2004 13:22:15 -0700
>Received: from sxpublic.imatix.net ([213.193.162.178]) by
>mc5-f35.hotmail.com with Microsoft SMTPSVC(5.0.2195.6824); Sat, 21 Aug 2004
>13:22:14 -0700
>Received: from sxpublic.imatix.net (localhost [127.0.0.1])by
>sxpublic.imatix.net (Postfix) with ESMTPid 903091C10AF7; Sat, 21 Aug 2004
>22:22:01 +0200 (CEST)
>Received: from ms-smtp-03.rdc-kc.rr.com (ms-smtp-03.rdc-kc.rr.com
>[24.94.166.129])by sxpublic.imatix.net (Postfix) with ESMTP id
>B99591C109A9for ; Sat, 21 Aug 2004 22:21:30 +0200
>(CEST)
>Received: from mn.rr.com (CPE-65-30-225-94.mn.rr.com [65.30.225.94])by
>ms-smtp-03.rdc-kc.rr.com (8.12.10/8.12.7) with ESMTP id i7LKLRjE010602for
>; Sat, 21 Aug 2004 15:21:27 -0500 (CDT)
>X-Message-Info: N4u0pqWW+O1SX/g8ReGzcbn8xd1+THFn55xWYwnI8bo=
>Delivered-To: xitami@lists.xitami.org
>Message-ID: <4127AE4E.A9850789@mn.rr.com>
>Organization: WorldWide_Spam_killers
>X-Mailer: Mozilla 4.75 [en] (Windows NT 5.0; U)
>X-Accept-Language: en
>X-Virus-Scanned: Symantec AntiVirus Scan Engine
>X-Spam-Checker-Version: SpamAssassin 2.60 (1.212-2003-09-23-exp) on
>sxpublic.imatix.net
>X-Spam-Status: No, hits=0.0 required=5.0 tests=none autolearn=no
>version=2.60
>X-Spam-Level: Errors-To: xitami-admin@lists.xitami.org
>X-BeenThere: xitami@lists.xitami.org
>X-Mailman-Version: 2.0.11
>Precedence: bulk
>List-Help:
>List-Post:
>List-Subscribe:
>,
>List-Id: Xitami Users General Discussion
>List-Unsubscribe:
>,
>List-Archive:
>Return-Path: xitami-admin@lists.xitami.org
>X-OriginalArrivalTime: 21 Aug 2004 20:22:14.0979 (UTC)
>FILETIME=[8C3F8130:01C487BC]
>
>On the page at http://www.xitami.com/addons.htm
>
>Under Other Products there is a listing for;
> PerlChat is a Perl-based chat application, developed using Xitami.
>
>With a link to; http://www.perlchat.dk/html/perlchat.dk/index.html
>
>www.perlchat.dk is not a valid address.
>
>Does anyone know if this program will run on windows XP & what the correct
>address is, or if there is other chat software that works on XP & xitami?
>
>-
>Alex,
>
>
>--
>Xitami Users Mailing List -- For Xitami support
>To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami
_________________________________________________________________
Designer Mail isn't just fun to send, it's fun to receive. Use special
stationery, fonts and colors.
http://join.msn.com/?pgmarket=en-ca&page=byoa/prem&xAPID=1994&DI=1034&SU=http://hotmail.com/enca&HL=Market_MSNIS_Taglines
Start enjoying all the benefits of MSNŽ Premium right now and get the
first two months FREE*.
From xitami@lists.xitami.org Tue Aug 24 04:25:15 2004
From: xitami@lists.xitami.org (xitami@lists.xitami.org)
Date: Mon, 23 Aug 2004 20:25:15 -0700
Subject: [Xitami] Re: Xitami digest, Vol 1 #931 - 1 msg
In-Reply-To: <20040818042502.310.85705.Mailman@sxpublic.imatix.net>
References: <20040818042502.310.85705.Mailman@sxpublic.imatix.net>
Message-ID: <1093317915.412ab51bab55f@webmail.registerapi.com>
OK great, just name the folder "files" or whatever you like, make sure you have
the subdir as PUB in ftproot viz. 'xitami/ftproot/pub'. Drag n Drop your public
file you want accessed into /PUB/
You can go back to your site and paste an ftp link so you dont have to phyically
type it in your search box each time you would like to test or go to your site;
send me the home page link or your domain URL and I will try it to see if I can
logon FTP Anonymous. Xitami runs its FTP server out of the box.
Hope this helps out.
J/AN
Quoting xitami-request@lists.xitami.org:
> Send Xitami mailing list submissions to
> xitami@lists.xitami.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.xitami.org/mailman/listinfo/xitami
> or, via email, send a message with subject or body 'help' to
> xitami-request@lists.xitami.org
>
> You can reach the person managing the list at
> xitami-admin@lists.xitami.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Xitami digest..."
>
>
> Today's Topics:
>
> 1. Getting the FTP side up and running (Gyrobee@aol.com)
>
> --__--__--
>
> Message: 1
> From: Gyrobee@aol.com
> Date: Tue, 17 Aug 2004 23:08:13 EDT
> To: xitami@lists.xitami.org
> Subject: [Xitami] Getting the FTP side up and running
> Reply-To: xitami@lists.xitami.org
>
>
> -------------------------------1092798493
> Content-Type: text/plain; charset="US-ASCII"
> Content-Transfer-Encoding: 7bit
>
> The HTTP side of my site is running just fine, but I am having trouble
> getting my system configured for FTP. The goal is a plain vanilla anonymous
> FTP of a
> pot of files stored in a single directory.
>
> As just one example, I can put on the files in an FTPROOT directory in the
> XITAMI folder, but I cannot seem to set the configuration file to look in
> that
> directory. I keep getting error messages that say the file cannot be found.
>
> I am sure the answer is quite simple, but would appreciate some insight into
> what I'm doing wrong.
>
> Ralph
>
> -------------------------------1092798493
> Content-Type: text/html; charset="US-ASCII"
> Content-Transfer-Encoding: quoted-printable
>
>
> rset=3DUS-ASCII">
>
> f">
> The HTTP side of my site is running just fine, but I am having
> trouble=20=
> getting my system configured for FTP. The goal is a plain vanilla
> anonymous=20=
> FTP of a pot of files stored in a single directory.
>
> As just one example, I can put on the files in an FTPROOT directory
> in=20=
> the XITAMI folder, but I cannot seem to set the configuration file to look i=
> n that directory. I keep getting error messages that say the file cannot
> be=20=
> found.
>
> I am sure the answer is quite simple, but would appreciate some insight=
> into what I'm doing wrong.
>
> Ralph
>
> -------------------------------1092798493--
>
>
>
> --__--__--
>
>
> --
> Xitami Users Mailing List -- Digest Version
> To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami
>
> End of Xitami Digest
>
From xitami@lists.xitami.org Sat Aug 28 01:34:13 2004
From: xitami@lists.xitami.org (Josh A)
Date: Fri, 27 Aug 2004 18:34:13 -0600
Subject: [Xitami] protected directories not accessible with SSL
Message-ID: <412FD305.10906@coaxial.ca>
I have recently upgraded from xitami to xitami pro to provide SSL to a
customer.
Xitami/Pro v2.4c3 on windoze 2003 enterprise
I have configured sslhttp.cfs and migrated my config files (only
defaults.aut and defaults.cfg - this is a single user / single domain
server)
http://domain works
http://domain/private user:pass works
https://domain works
https://domain/private user:pass Doesn't work
when trying to access a protected directory (defined in defaults.aut)
or even /admin when using HTTPS, it rejects the credentials, though
they are correct and work with non-ssl.
I'm sure there is just some setting I missed, let me know if there is
any further info I can provide.
Thanks !!
Josh
From xitami@lists.xitami.org Mon Aug 30 12:43:52 2004
From: xitami@lists.xitami.org (Dario B.)
Date: Mon, 30 Aug 2004 13:43:52 +0200
Subject: [Xitami] Maybe solution for interrupted download of long files on slow connection after 32k (or multiples)
Message-ID: <000501c48e86$baa083a0$34455e3e@Annamaria>
With the last versions of xitami I noticed that on slow connections
(dial-up) it often happens that the connection breaks and there is a socket
error; even downloading Xitami i had to use getright because of the
disconections.
I tried to solve this recompiling with Borland C++ builder (it was
difficoult... some things was quite tricky to make it work... lots of
warnings and some errors... but I did it somehow).
I think it's some timeout error on writing on the socket: if I understood
how it works, when a file is uploaded is divided in segments and uploaded,
and there is a timeout for every segment to be sent. The size of the segment
is in the file "smttran.c", the "var" name is "BUFFERSIZE" and is initially
set to 32768L, (32k), the timeout is specified in "smtsock.c" and is named
"WRITE_TIMEOUT" and is set to 10 (seconds); this means that if you can get
more than 32k in 10 sec (>3.2kbyte/sec) everything should be ok, otherwise
the socket "thinks" he isn't able to send data. I tried lowering BUFFERSIZE
to 4096 (4k) and WRITE_TIMEOUT to 60 sec (it makes about 70 bytes/sec should
be enough!) and it seems to work.
I hope at Imatix try this so, if it works, everyone can use it.
Dario B.
(sorry for my english, I'm Italian)
From xitami@lists.xitami.org Mon Aug 30 19:58:47 2004
From: xitami@lists.xitami.org (Josh A)
Date: Mon, 30 Aug 2004 12:58:47 -0600
Subject: [Xitami] protected directories not accessible with SSL
In-Reply-To: <412FD305.10906@coaxial.ca>
References: <412FD305.10906@coaxial.ca>
Message-ID:
Has anyone else experienced this problem ?
Does anyone have any ideas as to the cause or solution ?
This list is pretty dead.
Josh
-----Original Message-----
From: Josh A
To: xitami@lists.xitami.org
Date: Fri, 27 Aug 2004 18:34:13 -0600
Subject: [Xitami] protected directories not accessible with SSL
> I have recently upgraded from xitami to xitami pro to provide SSL to a
> customer.
>
> Xitami/Pro v2.4c3 on windoze 2003 enterprise
>
> I have configured sslhttp.cfs and migrated my config files (only
> defaults.aut and defaults.cfg - this is a single user / single domain
> server)
>
> http://domain works
> http://domain/private user:pass works
> https://domain works
> https://domain/private user:pass Doesn't work
>
> when trying to access a protected directory (defined in defaults.aut)
> or even /admin when using HTTPS, it rejects the credentials, though
> they are correct and work with non-ssl.
>
> I'm sure there is just some setting I missed, let me know if there is
> any further info I can provide.
>
> Thanks !!
> Josh
>
>
>
> --
> Xitami Users Mailing List -- For Xitami support
> To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami
![ftp://taggart.glg.msu.= edu/gblogo.gif](3D"ftp://taggart.glg.msu.edu/gblogo.gif"){kind=link}