wrote:
> >"[1]" is appended to the end of all files downloaded via
> >http. Example: file.exe[1]
> >
> >This is a problem for users with file extensions hidden, who can't see
> >(and thus change) the error. Happens on all clients, for any file. Any
ideas?
> >
> >Ross Dakin
>
> It's a windows "feature".
> Because there is already a file.exe in the download directory, the new
file
> is renamed.
>
>
> --::Mailserver Verfaillie Bauwens::-- contact [postmaster@verfaillie.com]
> Alle mails gecontroleerd op virussen. Virusdefinities dagelijks aangepast.
> http://www.verfaillie.com
>
> --
> Xitami Users Mailing List -- For Xitami support
> To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami
>
From xitami@lists.xitami.org Tue Aug 19 00:29:06 2003
From: xitami@lists.xitami.org (Robert Gilbertson)
Date: Tue, 19 Aug 2003 00:29:06 +0100
Subject: [Xitami] Security issue with Xitami and CGI
Message-ID: <048c01c365e0$856e64b0$29de9bd9@ROBGILBERTSON>
This is a multi-part message in MIME format.
------=_NextPart_000_0487_01C365E8.E6754910
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
I don't know if anyone else has noticed this problem, but I tried =
realligning the location of the cgi-bin from E:\Xitami\cgi-bin to =
E:\Xitami\Webpages\cgi-bin to make the physical location of the cgi =
directory closer reflect the virtual location (as typed in the browser =
bar).
The problem is that, while Xitami then recognises cgi-bin as a cgi =
directory, it does not recognise CGI-BIN, or any other variation in =
case. All anyone has to do is change the case of the cgi directory in =
the URL bar of their browser, and, unless the script has been cached by =
the server, the visitor will be prompted to download the perl script.
As a temporary measure, you can enter the administration panel and =
change:
In the server settings, change 'CGI URLs start with' to '/', and=20
In the CGI settings, check 'Allow file mixing'.
Xitami now decides by itself whether it is an executable script or not, =
without reference to its location.
------=_NextPart_000_0487_01C365E8.E6754910
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
I don't know if anyone else has noticed =
this=20
problem, but I tried realligning the location of the cgi-bin from=20
E:\Xitami\cgi-bin to E:\Xitami\Webpages\cgi-bin to make the physical =
location of=20
the cgi directory closer reflect the virtual location (as typed in the =
browser=20
bar).
The problem is that, while Xitami then =
recognises=20
cgi-bin as a cgi directory, it does not recognise CGI-BIN, or any other=20
variation in case. All anyone has to do is change the case of the cgi =
directory=20
in the URL bar of their browser, and, unless the script has been cached =
by the=20
server, the visitor will be prompted to download the perl =
script.
As a temporary measure, you can enter =
the=20
administration panel and change:
In the server settings, change =
'CGI URLs=20
start with' to '/', and
In the CGI settings, check 'Allow =
file=20
mixing'.
Xitami now decides by itself whether it =
is an=20
executable script or not, without reference to its =
location.
------=_NextPart_000_0487_01C365E8.E6754910--
From xitami@lists.xitami.org Fri Aug 8 02:50:02 2003
From: xitami@lists.xitami.org (Tom Baker)
Date: Thu, 7 Aug 2003 20:50:02 -0500
Subject: [Xitami] Server load too high
References: <3F32A4F3.31157.1B0C8C34@localhost>
Message-ID: <003101c35d4f$61f34bc0$0200a8c0@dsl.gtei.net>
----- Original Message -----
From: "WhiteShepherd"
To:
Sent: Thursday, August 07, 2003 6:13 PM
Subject: [Xitami] Server load too high
> I've been getting some strange errors as of late. I run a ikonboard
> forum (and 3 other forums) under Xitami (console) 2.4d9 and perl
> on Win2k. The system is a Athlon 1000Mzh with 256 Megs of ram.
> The system is strictly dedicated to Xitami/Mysql for my CGI needs.
> I figured my server would be pretty well equipped for light to
> moderate use.
>
> However more and more I get the error "Server load too high."
> Between all the different forums there doesn't seem to be more
> than 20-30 people connected most the time. So I don't understand
> why the server is overloaded?
>
> Anyone with experience with this error and how to fix it?
>
> Thanks! Gene
Who get's this error? The server admin, or the user?
What do you have the maximum number of connections set to?
Tom
From xitami@lists.xitami.org Fri Aug 8 07:27:32 2003
From: xitami@lists.xitami.org (Marc Doigny)
Date: Fri, 08 Aug 2003 08:27:32 +0200
Subject: [Xitami] Server load too high
In-Reply-To: <3F32A4F3.31157.1B0C8C34@localhost>
Message-ID: <5.1.0.14.2.20030808082210.00ac9b60@verfaillie4.verfaillie.local>
At 01:13 8/08/03, "WhiteShepherd" wrote:
>However more and more I get the error "Server load too high."
>Between all the different forums there doesn't seem to be more
>than 20-30 people connected most the time. So I don't understand
>why the server is overloaded?
>
>Anyone with experience with this error and how to fix it?
1
Increase the timeout for cgi programs.
A good value is 15 to 60 seconds.
You get this error if the cgi program don't terminate within the time limit.
It is also possible that MySQL is responding too slowly and that the php
program is waiting for a response. Look at the Task Manager to check which
program is using most time slices.
Marc
--::Mailserver Verfaillie Bauwens::-- contact [postmaster@verfaillie.com]
Alle mails gecontroleerd op virussen. Virusdefinities dagelijks aangepast.
http://www.verfaillie.com
From xitami@lists.xitami.org Fri Aug 29 13:15:18 2003
From: xitami@lists.xitami.org (Hanna Camille Werne)
Date: Fri, 29 Aug 2003 14:15:18 +0200
Subject: [Xitami] xitami/ssi
Message-ID: <5.2.1.1.0.20030829141352.009e8100@pop3.netcom.no>
I've installed xitami for the first time and I'm trying to get ssi to work,
but after 6 hours now. I give up.
Can someone please tell me how to get ssi to work.
I only get this message.
#include file not found: e:\www\index.shtml/test.txt
[perlssi: "#include file="test.txt" " produced errors]
the test.txt is locaded in the same directory as test.shtml where i put
And those files are locaded in e:\www\
Please can someone tell me what to do?
From xitami@lists.xitami.org Fri Aug 29 16:10:30 2003
From: xitami@lists.xitami.org (Michael Gibbons)
Date: Fri, 29 Aug 2003 16:10:30 +0100
Subject: [Xitami] xitami/ssi
Message-ID:
Hi
Very short on time, but I think your problem is the location of the file in xitami check where you have specified it chances are it is being defaulted to c:\ try putting the include file there obviously this will have to be change but if you kn ow where it is defaulting to you can then add directory
Mike
The information or opinions in this message (including
any attachments) are those of the author and are not
necessarily those of Uxbridge College, which disclaims
responsibility for loss or damage arising from its use to
the maximum extent permitted by law. E-mail messages
sometimes go astray. This message is sent in
confidence for the addressee only. It may contain
confidential or sensitive information. The contents
are not to be disclosed to anyone other than the
addressee. Unauthorised recipients are requested to
preserve this confidentiality and to advise the originator.
immediately and to delete the message without copying,
altering or disclosing its contents. E-mails to or from
Uxbridge College may be monitored by the College in
accordance with its current policy.
From xitami@lists.xitami.org Fri Aug 29 16:30:30 2003
From: xitami@lists.xitami.org (Stuart Hands)
Date: Fri, 29 Aug 2003 16:30:30 +0100
Subject: [Xitami] xitami question
In-Reply-To:
Message-ID: <000001c36e42$7aeb8c60$7500a8c0@redlineuk.com>
Might be a quickie this one:
Has anyone had any probs with the 95/NT build of xitami where is throws
up a dialog box telling you when the service was started while meanwhile
it hangs at 'Suspended' in the background? When you click 'OK', the
xitami process is terminated!
I've checked the access log and there is nothing in there which suggests
anyone was screwing around trying to hack it.. (although I've seen many
attempts from people that have tried with the
addresstoolongprobleminIIS!)
Any ideas anyone?
I know, I know... get the unix based version... but any serious
ideas? Lol
Cheers,
Stu
From xitami@lists.xitami.org Fri Aug 29 16:40:46 2003
From: xitami@lists.xitami.org (Hanna Camille Werne)
Date: Fri, 29 Aug 2003 17:40:46 +0200
Subject: [Xitami] xitami/ssi
In-Reply-To:
Message-ID: <5.2.1.1.0.20030829173328.009e6510@pop3.netcom.no>
I'm sorry, but I didn't understand that. I've sat the default web directory
to e:\www
And both index.shtml with the include command. and the file i want to
include is in e:\www or /www/ =)
I looked at the Perlssi file in the xitami directory, to check if the
config was right, but I didn't understand much of that.
Anyhow, this is the error message I get. If I didn't post it the last time =)
#include file not found: e:\www\index.shtml/test.shtml
[perlssi: "#include file="test.shtml" " produced errors]
~ Hanna
At 16:10 2003-08-29 +0100, you wrote:
>Hi
>Very short on time, but I think your problem is the location of the file
>in xitami check where you have specified it chances are it is being
>defaulted to c:\ try putting the include file there obviously this will
>have to be change but if you kn ow where it is defaulting to you can then
>add directory
>
>
>Mike
>
>
>
>The information or opinions in this message (including
>any attachments) are those of the author and are not
>necessarily those of Uxbridge College, which disclaims
>responsibility for loss or damage arising from its use to
>the maximum extent permitted by law. E-mail messages
>sometimes go astray. This message is sent in
>confidence for the addressee only. It may contain
>confidential or sensitive information. The contents
>are not to be disclosed to anyone other than the
>addressee. Unauthorised recipients are requested to
>preserve this confidentiality and to advise the originator.
>immediately and to delete the message without copying,
>altering or disclosing its contents. E-mails to or from
>Uxbridge College may be monitored by the College in
>accordance with its current policy.
>
>
>
>--
>Xitami Users Mailing List -- For Xitami support
>To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami
From xitami@lists.xitami.org Fri Aug 29 17:08:25 2003
From: xitami@lists.xitami.org (Brad Smith)
Date: Fri, 29 Aug 2003 12:08:25 -0400
Subject: [Xitami] xitami/ssi
In-Reply-To: <5.2.1.1.0.20030829173328.009e6510@pop3.netcom.no>
References:
Message-ID: <3F4F4239.9261.5572FE9@localhost>
It has been a long time since I last had SSI set for Xitami, but, to the
best of my recollection, you have to go into the Xiatami web-based
administrator, proceed to Configuration, then to Filters.
In the Filters menu's left column, enter the suffix (i.e., .shtml) of the type
of SSI file you want to use (mapping the suffix to the filter program). In
the right column, enter the location of the 'perlssi' file. I believe this is
in your Xitami web server directory.
Choose to save our settings.
Now, try your test again. That should route all shtml files through the
server, past the filter, back to the server and out to your clients.
Sincerely,
Brad Smith
On 29 Aug 2003 at 17:40, Hanna Camille Werne wrote:
> I'm sorry, but I didn't understand that. I've sat the default web directory
> to e:\www
> And both index.shtml with the include command. and the file i want to
> include is in e:\www or /www/ =)
>
> I looked at the Perlssi file in the xitami directory, to check if the
> config was right, but I didn't understand much of that.
>
> Anyhow, this is the error message I get. If I didn't post it the last time =)
>
> #include file not found: e:\www\index.shtml/test.shtml
> [perlssi: "#include file="test.shtml" " produced errors]
>
>
> ~ Hanna
>
> At 16:10 2003-08-29 +0100, you wrote:
> >Hi
> >Very short on time, but I think your problem is the location of the file
> >in xitami check where you have specified it chances are it is being
> >defaulted to c:\ try putting the include file there obviously this will
> >have to be change but if you kn ow where it is defaulting to you can then
> >add directory
> >
> >
> >Mike
> >
> >
> >
> >The information or opinions in this message (including
> >any attachments) are those of the author and are not
> >necessarily those of Uxbridge College, which disclaims
> >responsibility for loss or damage arising from its use to
> >the maximum extent permitted by law. E-mail messages
> >sometimes go astray. This message is sent in
> >confidence for the addressee only. It may contain
> >confidential or sensitive information. The contents
> >are not to be disclosed to anyone other than the
> >addressee. Unauthorised recipients are requested to
> >preserve this confidentiality and to advise the originator.
> >immediately and to delete the message without copying,
> >altering or disclosing its contents. E-mails to or from
> >Uxbridge College may be monitored by the College in
> >accordance with its current policy.
> >
> >
> >
> >--
> >Xitami Users Mailing List -- For Xitami support
> >To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami
>
>
> --
> Xitami Users Mailing List -- For Xitami support
> To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami
>
From xitami@lists.xitami.org Fri Aug 29 18:17:13 2003
From: xitami@lists.xitami.org (Hanna Camille Werne)
Date: Fri, 29 Aug 2003 19:17:13 +0200
Subject: [Xitami] xitami/ssi
In-Reply-To: <3F4F4239.9261.5572FE9@localhost>
References: <5.2.1.1.0.20030829173328.009e6510@pop3.netcom.no>
Message-ID: <5.2.1.1.0.20030829191500.009e6040@pop3.netcom.no>
Thank you, Brad Smith.
But it still doesn't work.
I get [perlssi: "#include file="test.shtml" " produced errors]
But works fine =)
~ Hanna
At 12:08 2003-08-29 -0400, you wrote:
>It has been a long time since I last had SSI set for Xitami, but, to the
>best of my recollection, you have to go into the Xiatami web-based
>administrator, proceed to Configuration, then to Filters.
>
>In the Filters menu's left column, enter the suffix (i.e., .shtml) of the
>type
>of SSI file you want to use (mapping the suffix to the filter program). In
>the right column, enter the location of the 'perlssi' file. I believe
>this is
>in your Xitami web server directory.
>
>Choose to save our settings.
>
>Now, try your test again. That should route all shtml files through the
>server, past the filter, back to the server and out to your clients.
>
>Sincerely,
>Brad Smith
>
>On 29 Aug 2003 at 17:40, Hanna Camille Werne wrote:
>
> > I'm sorry, but I didn't understand that. I've sat the default web
> directory
> > to e:\www
> > And both index.shtml with the include command. and the file i want to
> > include is in e:\www or /www/ =)
> >
> > I looked at the Perlssi file in the xitami directory, to check if the
> > config was right, but I didn't understand much of that.
> >
> > Anyhow, this is the error message I get. If I didn't post it the last
> time =)
> >
> > #include file not found: e:\www\index.shtml/test.shtml
> > [perlssi: "#include file="test.shtml" " produced errors]
> >
> >
> > ~ Hanna
> >
> > At 16:10 2003-08-29 +0100, you wrote:
> > >Hi
> > >Very short on time, but I think your problem is the location of the file
> > >in xitami check where you have specified it chances are it is being
> > >defaulted to c:\ try putting the include file there obviously this will
> > >have to be change but if you kn ow where it is defaulting to you can then
> > >add directory
> > >
> > >
> > >Mike
> > >
> > >
> > >
> > >The information or opinions in this message (including
> > >any attachments) are those of the author and are not
> > >necessarily those of Uxbridge College, which disclaims
> > >responsibility for loss or damage arising from its use to
> > >the maximum extent permitted by law. E-mail messages
> > >sometimes go astray. This message is sent in
> > >confidence for the addressee only. It may contain
> > >confidential or sensitive information. The contents
> > >are not to be disclosed to anyone other than the
> > >addressee. Unauthorised recipients are requested to
> > >preserve this confidentiality and to advise the originator.
> > >immediately and to delete the message without copying,
> > >altering or disclosing its contents. E-mails to or from
> > >Uxbridge College may be monitored by the College in
> > >accordance with its current policy.
> > >
> > >
> > >
> > >--
> > >Xitami Users Mailing List -- For Xitami support
> > >To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami
> >
> >
> > --
> > Xitami Users Mailing List -- For Xitami support
> > To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami
> >
>
>
>
>--
>Xitami Users Mailing List -- For Xitami support
>To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami