[Xitami] PHP/perl as non-CGI

Thu, 6 Dec 2001 11:56:04 -0500

Here is what I get from the debug.log

2001/12/06 11:53:59: - URL handled by filter 'c:\php\php.exe'
2001/12/06 11:53:59: - request refers to a normal readable file
2001/12/06 11:53:59: Transfer file=C:\WINNT\TEMP\pipe0001.flt size=0 from=0


----- Original Message -----
From: "Marcio Marchini" <mqm@magma.ca>
To: <xitami@lists.xitami.org>
Sent: Thursday, December 06, 2001 11:31 AM
Subject: RE: [Xitami] PHP/perl as non-CGI


>
> If it is just serving the file instead of executing it, add this to your
> defaults.cfg:
>
> [Mime]
> .php=application/x-httpd-php
> .php3=application/x-httpd-php3
>
>
>
> I've had the same problem with regular CGI stuff.
>
> marcio
>
> > -----Original Message-----
> > From: xitami-admin@lists.xitami.org
> > [mailto:xitami-admin@lists.xitami.org]On Behalf Of Peter
> > Sent: December 6, 2001 11:09 AM
> > To: xitami@lists.xitami.org
> > Subject: Re: [Xitami] PHP/perl as non-CGI
> >
> >
> > I've spent the morning trying to get php running as ISAPI without
> > any luck.
> > It sure looks like it should work the set-up is very similar to another
> > server I use. I don't seem to be getting any errors Xitami is
> > servering the
> > test page but it is not processing the script.
> >
> > The FAQ says:
> >   1.. First off, make sure Xitami is installed and running.
> >   2.. Next, download and install the PHP binary distribution into some
> > directory. We'll assume it's c:\php.
> >   3.. Add '.php=c:\php\php.exe' to the Filter section of the Xitami
> > confguration.
> >   4.. Rename the PHP initialisation file, 'php3.ini-dist' to
> > 'php3.ini' and
> > copy it into the Windows directory. Don't bother trying to set the PHPRC
> > environment variable, because this does not seem to work.
> >   5.. Edit the ini file and change the 'extension_dir' setting to
c:\php.
> >   6.. Now test PHP by hand with a small test page, by running it in a
> > command window, in the Xitami directory:
> > c:\php\php webpages\test.php
> >
> >
> > ----- Original Message -----
> > From: "Marcio Marchini" <mqm@magma.ca>
> > To: <xitami@lists.xitami.org>
> > Sent: Thursday, December 06, 2001 10:28 AM
> > Subject: RE: [Xitami] PHP/perl as non-CGI
> >
> >
> > >
> > > As far as I know Xitami has LRWP, not FastCGI. LRWP is not
> > FastCGI, but it
> > > is very similar. "The protocol between Xitami and the LRWP Peer is
much
> > > simpler than the FastCGI protocol, and therefore less prone to
> > > implementation differences or errors. However, given the right
> > circumstances
> > > it is possible to run the same program as both a LRWP Peer and a
FastCGI
> > > Peer with only minor differences in the startup code. "
> > >
> > >
> > > So, you'd have to write your own C adapter to be a LRWP/FastCGI server
&
> > > link to the PHP/Perl interpreter.
> > >
> > > What I've seen in PHP (and probably Perl) under Win32 is that
> > they support
> > > the Microsoft way of doing things (ISAPI or something like
> > that), which I
> > > don't think Xitami supports ? Anyway, under PWS (Personal Web
> > Server) and
> > > IIS you can probably enable them in this faster mode (ISAPI).
> > >
> > >
> > > Again, maybe by now Xitami supports ISAPI, but I don't think so. I
think
> > > they don't because they want to be OS-portable, and ISAPI would be
> > > Windows-specific. I could be wrong.
> > >
> > > Zope (www.zope.org) has a regular, thin CGI which then talks to
> > Zope on a
> > > specific port. So, if you configure Zope behind Apache, you use this
> > > small&fast CGI which gets loaded/unloaded for every request, but it is
> > > fast/small. It then opens a connection to Zope on a given
> > socket, and they
> > > exchange data, and the little CGI passes the bytes back to
> > Apache. This is
> > > another option, but you'd have to write the little CGI yourself
> > and leave
> > > the PHP or Perl interpreter running, listening for requests on a port
> > (like
> > > a Java servlet engine, etc). The advantage of this compared to an
apache
> > MOD
> > > is that it is portable across web servers. You can run Zope
> > behind any web
> > > server just by porting this tiny CGI to the new platform. LRWP, on the
> > other
> > > ahnd, is Xitami-specific. MODs are Apache-specific. ISAPI is
> > > Windows-specific. The Zope solution is very portable with a small
> > > performance penalty (lightweight CGI + sockets). There's no
> > ideal solution
> > > :-)
> > >
> > > But Zope is designed to be a server & listen on a port, while
> > the PHP/Perl
> > > interpreters aren't. That's why they need more work, like a C code
that
> > > links to teh interpreter & does the glue work. It would be nice
> > if Xitami
> > > supported ISAPI.
> > >
> > > Sorry I don't have good news. Hope this helps a bit. Note that I may
be
> > > wrong in some points, it's been a while since I looked into this.
> > >
> > > marcio
> > >
> > >
> > > > -----Original Message-----
> > > > From: xitami-admin@lists.xitami.org
> > > > [mailto:xitami-admin@lists.xitami.org]On Behalf Of Vardhan Varma
> > > > Sent: December 5, 2001 11:04 PM
> > > > To: 'xitami@lists.xitami.org'
> > > > Subject: [Xitami] PHP/perl as non-CGI
> > > >
> > > >
> > > >
> > > >  Hi,
> > > >   I've searched the archive, and while the question of PHP and PERL
> > > > as non-CGI (fastcgi/WSX etc and not seperate process executed
> > everytime)
> > > > has been raised many time, there has
> > > > been no post telling 'yes i've done it and here is the url'.
> > > >
> > > > Does anybody has PHP/perl running as non-CGI in Xitami ?
> > > > If yes, are they willing to share the patch .
> > > >
> > > >
> > > > --Thanx
> > > > --Vardhan
> > > >
> > > > --
> > > > Xitami Users Mailing List -- For Xitami support
> > > > To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami
> > > >
> > >
> > >
> > > --
> > > Xitami Users Mailing List -- For Xitami support
> > > To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami
> > >
> > >
> >
> >
> >
> > --
> > Xitami Users Mailing List -- For Xitami support
> > To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami
> >
>
>
> --
> Xitami Users Mailing List -- For Xitami support
> To unsubscribe: http://lists.xitami.org/mailman/listinfo/xitami
>