[Xitami] setting up Cisco 1720 router

[Dan Baker]

first of all, this is way off topic for the xitami list, and I would
appreciate it if the thread moved to a newsgroup like comp.network....
you'll probably get more response.

Tran David-P94446 wrote:

> Hope you don't might that I emailed you. I also have the Cisco 1720 router, but I can't seem to configure it at all. This is what I did, but I can't get my PC to go to the web...
> 
> This is what I got from my internet provider....
> 
> IP: 24.177.67.129
> Submask: 255.255.255.0
> Gateway: 24.177.67.1
> 
> The router came with a build-in 10/100 Ethernet card and WAN (WIC-ENET) card which is plugged into WIC-0.
> 
> I configured the 10/100 Ethernet end to point to my local LAN (ip - 10.10.10.1), and ethenet0 to point to the outside network (cable-modem.....IP = 24.177.67.129)......
> 
> I have a private LAN with the following IP range: 10.10.10.0 --- 10.10.10.254
-------------------

I think that local LANs are expected to have the IP range 192.168.0.xxx
by default. you might try that. for the router/firewall I use the IPs
are obtained automatically with the DNS disabled, WINS using DCHP, and
no gateway defined. The router does all the work and pulls the numbers
from the ISP. 

good luck,

D